Like us on Facebook and Follow us on Twitter


Directory:Vortex Synergy Model -- The Messiah Machine

Lasted edited by Andrew Munsey, updated on June 15, 2016 at 12:54 am.

  • This page has been imported from the old peswiki website. This message will be removed once updated.

A method of transport which eliminates the necessity for breaking the cohesive forces in water. This "transport system" is based on a topological deformation of water, resulting from rotation but without application of pressure, in which the cohesive forces are not affected during upward transport.

Messias Machine - the Synergy Model

On August 20, 2007, Achmed A. W. Khammas wrote

(article excerpts added here)

Subject: Messias Machine - the Synergy Model

Time to inform you about a VORTEX system started 1975:

English articles: - "This paper deals with a method of transport which eliminates the necessity for breaking the cohesive forces in water. This "transport system" is based on a topological deformation of water, resulting from rotation but without application of pressure, in which the cohesive forces are not affected during upward transport." - "The inventor, Al-Masih Daruish Al-Khooss (or Abou Mohammad), was born in 1926. He is a "roadpointer" to a new type of energy device. He believes his device would eliminate the need for oil energy and destroy its Systems, and that we could thus produce electric power without fights and monopolies. This new machine is being developed in Syria, using water as a medium."

English article: A physicist’s view on the Messiah-Machine of Daruish al Khoos (Backup) - "By the following article the author wants to introduce plans of a major power plant that uses self-strengthening phenomena in vortical flow of water to generate electric energy. Especially the newest research from Russia proves that such a system could work."


Image:Messiasmaschine mit diagram.gif

German detailed informations:


quoting from


The nucleus of the system is a large upright standing hollow cylinder mounted on top of a heavy flywheel which runs on a thrust bearing. This whole apparatus rotates vertically. The water enters through a large opening into the rotating body and is transported spirally upwards and exists over the rim or through holes at the upper side of the cylinder into a catching basin, which is mounted outside, from which it then goes downward by gravitation through the turbines to its original starting level. Therefore an non-interrupted circulation comes into existence in which the water moves spirally upwards and then falls down straight again (via gravity). The machine is oriented according to the gravitational axis (the vertical axis) and the ocean or water intake level (the horizontal axis).

When the machine is started, the water in the horizontal intake pipe is sucked up into the rotating cylinder - it does not require additional energy to pump it up.

Insofar as the segments of this system which are below the water level of the whole System which is located on land, we can obtain a constant inflow into the rotating body which, in addition, gives a useful starting acceleration to the water. As long as the system is not operating, the water in the inside will come to rest on the zero-level of the intake water. If we start the rotation, the water climbs spirally on the smooth surface of the inside wall of the rotating body, whereby, at the same time, the vacuum created by the climbing water is compensated or balanced through new water coming in. Here we have the expression of adhesion and cohesion, the gravitational forces and the centriftigal forces. By choosing the most suitable materials for the coating of the inside of the container, the efficiency of this effect can be increased.


Now a waterswirl (vortex) is built up similar to the one you have in your bathtub drain, but which is an upward swirl in this case. For comparison, take the tomados, weather cyclones, etc. Since there exists a steady through-flow of the water coming from the inlet below, the rotaring body stores a certain amount of water on this rotating, upward spiralling wall. The amount of water depends on the form and size (capacity) of the wall. The water on the wall is constantly exchanged, but the volurnn of water on the wall remains the same after the device has reached its capacity.

After having reached its capacity limit, the water will overspill on the top edge of the rotating cylinder into a catching basin. Remember: So far we have only invested energy. The basic function of the machine is now clear - to let the water run upwards.

lt might be mentioned that the cylindrical rotating body could have the optimal form of a cone or be topological to suit the flow (Professor Trostel, TU Berlin).


The rotational principle displayed by this simple model is more efficient and could be developed better than other principles in hydrodynamics. Each vortex acts as a lung capillary. It is all a breathing process, the same as with trees and plant life in general. So far the world's machinery is based on the principle of exhalation, accompanied by tons of suffocating poisons of all sorts. In comparison, here we have the breathing of the "angels of Paradise", like cooling balsam, a breathing which harmonizes with the breathing of the magnetic field and the gravitational field. This breathing is circular and, at the same time, equally distributed in-and-out breathing. It is even superior to the ideal of the Atman consciousness breathing of the Indian Yogis in its endurance and steadiness.

Through our energy supply, we cause the body to rotate, to set it in motion. Through this motion, the body gains its center of gravity and therefore "relatively" loses weight. Through losing weight, the body can again move easier and since the body can now be moved easier, it needs less energy input to maintain it in motion, whercby the circle of lightness is closed.

This positive action of the intermediate storage of mechanical energy can be increased if we construct a very heavy flywheel (which is mounted on top of a thrust bearing carrying the rotating body). This large weight is acting in conjunction with the total capacity in favor of a larger storage capacity, which, of course, requires a higher starting energy input.

The air pressure acts as a stablizer on the Standing, turning and exchanging water wall. There also exists a core vacuum through this, rotating air in the core, which enhances suction and accelerates the slip increase. The 10 tons/meter2 existing air pressure we need not overcome because the upward winding water "kind of slips through".


Each wind movement helps to overcome friction. Each wind puff, it doesn't matter from which direction it comes, additionally accelerates the rotation. The energy which we further have to invest in the system will, for this and other reasons, be brake energy.

The earth rotation, the spin, reinforces the rotation. The rotational direction of the machine depends on whether the machine is in the northern or southem hemisphere. Gravitation pulls the water downwards as soon as it comes out of the rotating cylinder into the gravitational field, so gravitation gives the downward direction which helps to stabilize any rotational movement and it does not prevent an upward transport of the water. Through the angular momentum of the planet's magnetic field, we have the possibility of gaming additional acceleration in the flywheels.


The upward flowing water has a certain temperature at the inlet. Through the spiral motion, the water cools off whereby the heat energy released is changed into kinetic energy, an anti-entrophic action, which possesses the Opposition of dissipation. In other words, the centripedal action now has taken over.

The Manfred-von-Ardenne-Institute in Dresden, Germany has a different opinion, of course, but they feel the truth will surface once a pilot model is in Operation.

Since the system is fed through the surface water, a temperature exchange would result in favor of mechanical rotation through a direct usage of the sun energy, since this energy is in the form of warmth (temperature). According to the Archimedian water compression prineiple, water which exists on the surface of an ocean or a lake or any water body is warmer than that in the depths. This will also help to get the device in motion.


It has not been possible, so far, to make precise measurements with our models which have been handcrafted in a domestic (primitive) way since the quality of these has not been sufficient and accurate instruments have not been available to us.


See Talk:Directory:Vortex Synergy Model -- The Messiah Machine

NEC Comments

The following comments were made by members of the New Energy Congress.

Worth Mention

On Aug. 21, NEC member, Congress:Advisor:Kenneth M. Rauen wrote:

[This is worth mention] because there is some explanation for

unusual energy flow (thermal into kinetic), providing

the first justification I have ever read for

Schauberger's hypothesis of energy from swirling

water. Of course, experimental evidence of "OU" must

be provided. With some course of action indicated,

the pdf file is worth mention.

More Complete Vortex Model Probably on Atomic Level

On Aug. 24, 2007, NEC member, Congress:Member:Adrian Akau wrote:

This is an interesting discovery because it shows that water spinning in a vortex results in the exchange of energy. I am wondering if this type of vortex action could be used later on to produce cooling for refrigeration. The description of the invention is complex because they are trying to explain in regular terms what is happening but I think a better explanation would have to be at a molecular or even electron level.

My thinking on this matter is that the spin of the water allows the spin of the electrons in the water molecules to interact in some way, but not necessarily with the other spinning water molecules. Heat energy (energy of vibration and rotation) would have to flow from the water molecules in order to cool the water (not yet verified) and at the same time, supply kinetic energy for the cooled water molecules to be raised up higher than normally expected against the action of gravity. Precisely how this process occurs is not clearly known. It is also not yet proven if the amount of kinetic energy produced exceeds the energy of the water molecules lost through the cooling effect. If, however, this is the case, then an energy conversion of some sort would have had to have taken place during the time the water molecules moved in the vortex.


Achmed A. W. Khammas

Treskowallee 124

D - 10318 Berlin - Germany

Tel. ++49 (0)30 - 427 97 79

email: []




See also

Directory:Viktor Schauberger

PowerPedia:Viktor Schauberger

Directory:Vortex Technologies

- Directory