From PESWiki

Discussion page for Directory:Project Home 2010.

• 
  Featured: Grand Unified Theories / Anti Gravity / Magnet Motors >
  Project Home 2010 - The objective of the project is to succeed with an experiment in relativity to prove out the realities of the universe by developing a magnetic propulsion and anti-gravity system, yielding a vehicle that could levitate above the ground on a cushion of self-generated magnetized air. Project to be completed in 2010. (PESWiki; Nov. 10, 2008)
  

Comments

With regards to the posted archive links

There are articles some people have created in the archive links from third party sources who have done a story on Project Home 2010 in 2001 and 2002 using information and photos from the actual Project Home 2010 website, mixed in with other information that does not portain to Project Home 2010 whatsoever, for example, Project Home 2010 has never had anything to do with any place called "Sherry Park", which is evidently where the author is from, anything portaining to "Q-2000" which is evidently the author's website which their article about Project Home 2010 was included on, and Project Home 2010 has never had a colleague in it by the name of "William".

I can assure you that this technology is real

On March 22, 2009, J.J. of Envirotech E.A. LTD wrote (via YouTube contact)

It's nice to hear from you. I can assure you that this technology is real and there are no tricks. The video could include more if not for YouTube having a 1-Gig max size. We may be able to shoot more footage as time allows. With 2010 getting close we have been very busy, and the PH10V is currently being used for work on the project. This work is currently unpatented so we have to be careful with that at this point. The 2 students have devoted 10 years of their lives to it. The 2 students were 12 in 1999 and Matthew completed high school via GED by special arrangement with the board of education that year. Also in 1999 both students attended a Saturday class at a science center in Avon Connecticut. The 2 students are now 22 (2009) and are preparing to transfer to the state university this fall. This work has been continuously underway since 1999.

The 1:20 scale model is the exact scale working replica of the full size vehicle we have in the Project Home 2010 lab. All of the propulsion power is 1:20 scale that of the full size vehicle (Mass x acceleration = Newtons of force) The levitation is controlled by finding the vectors that make the net force = 0 and the vectors are positioned by the EMF focal point positioning which is how the vehicle steers. The wheels are only gliding wheels when in 'line' mode. The vehicle can transverse while in 'Lev' mode. The tow line cable attached to the front is for work we are using the vehicle for in Project Home 2010. The video did have a soundtrack to it, but it was a song by ZZ Top and we were worried about copyright laws on YouTube regarding the use of the song.

The field is generated below the vehicle therefore anything that enters the field becomes part of the field. It is not like a barrier that objects cannot penetrate. The demonstration over water surface shows levitation over water where the water becomes part of the field. The focal points lock magnetic moments in the mediums that vector from ground to vehicle at the programmed height. The 1:20 scale model has working control panels inside the control compartments that are interfaced by radio control through the polycarbonate body. The language of the computers are raw machine language so the laptops also have software to adapt the keys to the machine commands.

Bogus Company Name

On March 22, 2009 pm, Max Zornada wrote:

You recently featured an article called "Project Home 2010 Video Shows Levitating Magnet-Propelled Vehicle". In this article it was claimed that it is sponsored by an Australian organisation called Envirotech E.A. LTD.

It may be of interest to know that no such organisation or business bearing this name exists or has ever existed in Australia. You can go to http://www.search.asic.gov.au/gns001.html where you can search for every business name and/or organisation that currently exists or has existed in the past in Australia and you will find no Envirotech E.A. LTD. In addition, the designation of LTD implying a company delimited by shares is incorrect for Australia. In Australia, such companies are required to append the terms Pty Ltd. to their name. This suggests that their claim to be an Australian company is bogus and very likely everything presented in the video is likely to be bogus as well.

Most Likely Illusion

On March 21, 2009 pm, a reader wrote:

Be really careful with this one. I'm a video producer, videographer, editor etc. but mostly I am a fan of magic tricks. This toy is suspended, most likely by a support rod, as the famous magic trick of levitating a woman and passing a hoop over her. The rod is bent just right to be hidden in each of the separate shots. Notice the camera moves VERY little and never circles the device. That's because it would reveal the support rod. There are several separate shots of it floating, springy like. That's the torsion on the rod from hand pressure or air movement. It's done nicely, but google something like "floating lady magic trick" and see if details and diagrams don't come up. If you have no luck at that, tell me and I'll find you a diagram. Remember the antigravity "speeder" that Luke Skywalker "drove" around? If you'll look closely, it, too, had that springy effect. It was mounted on a support arm and connected to a truck off camera. A few other effects were used to make it look real. Same effect as here. The hoverboard in Back To The Future also used a similar method. Good luck.

Same Story 10 Years Ago

On March 21, 2009 am, Sterling D. Allan wrote:

I received a phone call today from a person who wishes to remain anonymous, who claims to have been involved with this (now called) Project Home 2010 ten years ago. They were hitting him up for some funding at that time, in part to help the boys get their college education. He said that at that time, the two guys were allegedly in their late teens. The photos they showed him then were of what looks like the very same device shown above, even in the same type of setting: out in a wooded area, with leaves on the ground; but no snow. He said that in watching the above video and claims that it was as if he was transported back ten years -- same story, same device, same guys.

If his account is credible, it cast doubt on the above claimed accomplishment from an integrity point of view. The boys were not twelve in 1999, they were in their late teens -- early college age. Perhaps they have dusted off what they had going and are now making another run at it. But why would they need to fib about their age?

Device Description from Team Member

On Feb. 26, 2008, Jim Decker wrote:

The 2 students are attending state college in Connecticut under a research grant from their sponsors in Australia. They are on to something with regards to alternative energy sources using magnetism and gravity as two static forces working together. They have done extensive work with vectors on it. A few companies in the area know about the project and what they are working on. There is an industrial supply company that knows the 2 students well.

As the information describes, the apparatus for the acceleration experiment is a large centrifuge chamber and the vehicle will move along a steel track on the floor above the spinning mass and take readings during the experiment. The 1:20 scale model is tested to speak for the lifesize vehicle as it is less expensive to modify a model.

The Project Home 2010 polybit computer processor works with an addressing structure that simulates neurocircuitry in a multi-layer simultaneous processing method. First, the single commands retrieve data from relevant addresses which are treated as 'factors' in an equation.

The command being the equation. The pices of data as factors are accessed simultaneously and put together all at once to create the product of the command which is the solution to the command. On another processing level occouring simultaneous to the construction of the solutions to each individual command being assembled in one step, are the assembled commands with their solutions also being treated as addresses which are assembled simultaneously to create the solution to the entire program of commands. With the solved commands being retrieved from their sections of memory, they produce the solution to the program with each command treated as factors in the equation. The computer does process all the factors in one step simply by treating all the commands and tasks of each command as the factors in an equation.

The solution to the program is found in one step. The speed of this computer dwarfs conventional processors of todays age. Programs that control hardware in such a way that events the hardware performs must be done sequentially still are processed in one step but with variables. As soon as the hardware completes it's function and the next operation is to begin, then the value of the variable reaches the value that allows the math to continue. The sequential operations are conducted in one processing step simply by the time delay of the computer 'counting' during the one step. The human mind is processing information this way all the time by retrieving information simultaneously from various areas of memory and putting the parts together in one step to produce a solution to what the relationship of all the pieces of information is.

Computer Tech. Makes No Sense

On Jan. 11, 2009, Robert Benson wrote:

While I don't have the background to comment on the physics and engineering aspects to this post, I DO have sufficient background (30+ years as a computer professional) to comment on the computer technology which is described here. What they describe (a single step program!) makes no sense, and the addressing structure they mention is inoperable. Is it even remotely possible that there is some merit in this? Frankly, no.

Based on this, I believe this whole thing is a hoax.

Hoax

--Penny Gruber 06:57, 11 January 2009 (PST)

It is a very tongue in cheek hoax. A web page on a free hosting site tells us that an Australian environmental consulting company has decided to pursue perpetual motion by putting two twelve year olds through high school and college. As they complete their college work these two lucky students are to complete an experiment in "matter acceleration" to light speeds. They tell us they are going to achieve these speeds not with a particle accelerator, but with a device riding on skate board wheels. Hello?

Project 2010 Replies to PES Inquiry

On November 19, 2008, Jackie James, from Project Home 2010 wrote:

Thank you for your interest in our work. We are glad to hear that someone gave out our e-mail contact to a worthy site.

We hope to obtain more photography of the lab and it's devices soon. The Project Home 2010 Vehicle was just built in early 2008 and is still going through some tests.

The boys are now exploring possible ways to achieve perpetual motion. Mathematiclay it can be done using 2 static forces, which alone cannot produce energy, but working together they can. Using regular permanent magnets and gravity working together is what they are now working on now, and testing of the equipment remains ongoing as well. They haven't achieved anything with that yet.

We hope to reach "phase 3", the final phase of the project, which is where everything is built and being tested. Improvements with the computer programs are being found and implemented.

John Obik and Matthew M. Urquhart have Certificates in Machine Technology (2006) and are inducted into Phi Theta Kappa International honor society (2006). They will graduate from Asnuntuck Community College in Connecticut with Associates degrees in Technological studies in June of 2009. From there, they will continue research at Central Connecticut State University where they are already accepted, beginning Fall 2009- just before the completion of Project Home 2010.

In 2004, They had a prototype robot around 2-1/2 feet long levitate 3 feet above ground surface as they overloaded the current to see what would happen and it burned up and fell.

One of the pictures on the site shows the testing field at the lab with a black burned spot on the ground where this happened in 2004.

Since then there have been many improvements built into the actual PH10V built in 2008, and the mathematical calculations of 6 months to one year charge life coincide as they have field tested the vehicle in 2008 in levitation and ground travel. This summer they ran it in a brook and underwater and it worked well. Also no control compartments leaked.

The output energy is more like a pneumatic measurement of pressure, as the vehicle is using the air as leverage, and just sitting on the magnetic field in the air. The same repulse turned sideways ejects the vehicle away linearly for horizontal thrust. The field production is like an opposite and equal push between the vehicle and the air behind it. Not to be confused with a magnet following another magnet, which would not do anything.

The microwave charge excites the atoms in the stainless steel coils in the propulsion unit located in the rear of the vehicle, energizing them. The computer flip-flops the anode and cathode of the coil, counting the electrons in the KiloAmpers and switching the polarity as soon as they all ground. The electricity is never used, only the magnetic field it produces, therefore the current remains consistantly. The slight resistance in the cells does drain the electrical energy eventualy over a few months of use.

John and Matt want to measure the fields in levitation with Gauss meters and Ammmeters.

The information about the work is public domain. We are careful not to reveal too much about how the computer program works, as that is the heart of the technology. The hardware is relatively simple. Independant testing would be something more likely to be done after Project Home 2010 completes in 2010, and with the project over, patenting and searching for companies that can produce any possible products, etc. would involve their testing and improvement knowledge.

Jackie James
Project Home 2010 representitive
Envirotech E.A. LTD acting agent

See also

• Directory:Project Home 2010

- Other Directory listings • Latest • A-I • J-R • S-Z • Tree • News
- PESWiki home page