PESWiki.com -- Pure Energy Systems Wiki:  Finding and Facilitating the Best Exotic Free Energy Technologies







    

Talk:Directory:Andrea A. Rossi Cold Fusion Generator (E-Cat)

From PESWiki

Jump to: navigation, search

Discussion page for Directory:Andrea A. Rossi Cold Fusion Generator.

Most comments are posted in the footer of that page, but some, received by other means, are posted here. To add a comment, feel free to log in and edit this page. Or you can just poste in the comment section at the footer of this page.

  • Featured / Best Exotic FE: Nuclear > Cold Fusion >
    Directory: Andrea A. Rossi Cold Fusion Generator - Feature page at PESWiki for collecting material from around the web regarding Italian inventor, Andrea Rossi's energy amplifier, which produces useful power from the apparent fusion of hydrogen and nickel into copper at relatively low temperatures and pressures. They claim to be going into production with a 10 kW industrial product that is reliable, safe, and cheap. (PESWiki; January 17, 2011)

Contents

Comments

Scientists Still Learning

In his interview, Daniele Passerini said:

22PASSI - the fact remains that there is still a scientific explanation of what happens inside the machine...


And Andrea Rossi replied:

ROSSI: CERN has made that immense ring just to try and start to truly understand how atoms are made, because they do not know.

New Nuclear Theory Needed and Presented

Yes, Rossi is right.

So, look this strange hope of the theorists that try to explaind cold fusion:

1- they do not know the structure of the nuclei, they do not know how exactly the nuclei work when they produce some ordinary nuclear phenomena, and many nuclear properties of the nuclei cannot be explained by current Nuclear Physics.

2- Then, as the current Nuclear Physics cannot explain several ordinary nuclear phenomena and many properties of the nuclei, how could a theorist succeed to explain cold fusion by trying to do it from the foundations of the current Nuclear Physics ?

3- If the nuclear model of current Nuclear Physics should be correct, it would be able to explain all the nuclear phenomena and all the nuclear properties of the nuclei. But it is not able to to it.

4- Therefore, is it reasonable to expect to explain cold fusion by taking as a point of departure a WRONG nuclear model, unable to explain even some ordinary nuclear phenomena ?


For the explanation of could fusion, there is need a NEW nuclear model.

A new theory capable to explain cold fusion must be developed by taking in consideration a new nuclear model capable to explain those nuclear phenomena not explained yet by the current Nuclear Physics.

Such new nuclear model is proposed in Quantum Ring Theory.


See:

PowerPedia:Foundations for Cold Fusion

http://peswiki.com/index.php/PowerPedia:Foundations_for_Cold_Fusion


Article: How zitterbewegung contributes for cold fusion in Pamela Mosier-Boss experiment http://peswiki.com/index.php/Article:_How_zitterbewegung_contributes_for_cold_fusion_in_Pamela_Mosier-Boss_experiment


PowerPedia:Cold Fusion Theories

http://peswiki.com/index.php/PowerPedia:Cold_Fusion_Theories


Article:Cold Fusion and Gamow's Paradox

http://peswiki.com/index.php/Article:Cold_Fusion_and_Gamow%27s_Paradox


PowerPedia:Cold fusion, Don Borghi's Experiment, and hydrogen atom

http://peswiki.com/index.php/PowerPedia:Cold_fusion%2C_Don_Borghi%27s_Experiment%2C_and_hydrogen_atom


PowerPedia:New model of neutron: explanation for cold fusion

http://peswiki.com/index.php/PowerPedia:New_model_of_neutron:_explanation_for_cold_fusion

Do It Yourself

Nickel/hydrogen catalytic fusion

On January 23, 2011 12:20 PM MST, Lawrence <lawrencerayburn {at} yahoo.com> wrote:


This CAN be done on the bench at home. TEG converters on the metal reaction chamber would convert to electricity...though not very efficiently....generating steam and driving a piston steam engine driving an alternator would be more efficient.

All it takes is a 12 volt automotive battery to supply the heating filament with 400 watts to heat the hydrogen/nickel powder mixture to 1100 degrees F....from that point on the catalytic reaction becomes self sustaining. With no air in the sealed chamber, the fusion catalytic reation will continue without exploding or overpressuring the chamber....producing heat of 1800 degrees F.... which, transferred to a water pressurized vessel viat heat exchanger fins on outside of the reaction chamber...WILL boil water, bringing it to 800 degree 500 PSI live steam in sufficient volume to drive a piston steam engine of 200 HP quite handily, producing as much as 15 kilowatts for home use (220 and 120 volt single phase) for only pennies per month maintaining the 12 volt battery charge for the 400 watt filament heater. All in a package 3 feet long, 2 feet wide, and 2 feet high.

And...a person could convert an aluminum volkwagon or corvair engine to run off the steam generated....or even cobble up a steam engine out of a wankel engine...from a Mazda for instance.....for CHEAP. Inject the steam into the cylinders via a distributive manifold tied into the cylinders through the sparkplug hole and ehaust the steam via the exhaust valve manifold.

Put a 12 volt electric clutch on the flywheel of the engine and engage it to drive an alternator or two or four.

Using automotive surplus equipment would make the build affordable. Something to experiment with.

- - - -

Buddy from George, USA responded:

He is missing a few things...

First, we need to know what catalysts are being used and what special preparations have been done to the nano-nickel powder.

Also, nano-nickel powder is very toxic so there would need to be specific safety guidelines...

- - - -

On January 23, 2011 2:47 PM MST, Lawrence <lawrencerayburn {at} yahoo.com> responded:

It doesn't require nano nickel powder....simple granular nickel powder will do. When filling the reaction tube with hydrogen after adding the nickel powder, you must flush the tube in the vertical position with enough hydrogen to force the oxygen out of the tube....the oxygen being heavier than the hydrogen, the hydrogen gas will displace the oxygen and nitrogen and trace carbon dioxide of the atmosphere in the reaction tube, leaving only pure hydrogen and nickel powder in the reaction chamber. Without oxygen, the hydrogen WILL NOT BURN or explode in the reaction tube....Then then 400 watt filament heater will bring the hydrogen gas to the 1100 degree Fahrenheit threshold for the fusion reaction to become self sustaining. There are no other catalysts involved. It is the heat threshold that is the catalyst for this reaction in a pure hydrogen atmosphere.

Because only micrograms of nickel are converted to copper with the release of lots of heat energy, the reaction can be maintained for 6 months or more before the filament heater need be shut down and the heat exchanger drench cooled to stop the reaction....then the reaction tube can be refilled with nickel powder and hydrogen...and the process started again.

- - - -

On January 23, 2011 3:42 PM MST, Lawrence added:

It doesn't produce really energetic Gamma radiation, or it would penetrate 13 FEET of lead shielding. It is a point source of mild gamma rays which are not energetic enough to engender secondary radiation in the metal of the reaction tube or the heat exchanger fins and tubing windings, or the water flashed to steam in the exchanger. And, because gamma rays die quickly with the square of the distance, 3/4 of an inch of lead shielding is NOT necessary. 1/4 inch of lead shielding (1/8 inch thicker than necessary) is all that is required OUTSIDE the fins and coiled aluminum tubing of the heat exchanger. Aluminum works very efficiently to transfer the heat from the chamber by conduction and flash water to steam. 6160 aircraft aluminum tubing is plenty strong enough to stand the internal pressure of the steam.

There are no gas mixtures or other catalysts involved. The reaction chamber must be flushed with pure hydrogen gas in the verticle position so the hydrogen gas displaces the heavier oxygen/nitrogen/carbon dioxide of the atmosphere...leaving only pure hydrogen gas and the nickel powder in the reaction chamber. The heating filament provides the heat threshold of the hydrogen gas/ nickel powder to start and maintain a catalytic reaction. The catalyst is actually an energy (thermal energy) threshold. Because there is no oxygen in the chamber...only pure hydrogen...when it is heated to 1100 degrees Fahrenheit by the filament, the gas DOES NOT BURN or explode...so the chamber contains the reaction and the heat is transferred by conduction of the chamber metal, by convection of the chamber gas, and by radiation to the heat exchanger where the water is flashed to steam. Because only micrograms of nickel are converted to copper, the reaction can be maintained by the filament above the catalytic energy threshold for 6 months or more...then shut off the filament heater, drench cool the heat exchanger which cools the reaction chamber and the gas below the catalytic energy threshold...and the reaction stops....with no residual radioactivity. Then it can be recharged with more nickel powder and pure hydrogen gas...the filament heater energized...and the reaction started again.

IF the home DIY builder isn't an idiot, they CAN build and operate their own home catalytic steam/electric generator....and what they do on their own property (away from the cities of course!) is their own damned business. No steam boiler regulations, licenses, etc...NONE of that crap.

As I get able this Spring, I am going to build one of these catalytic reaction generators for my own purposes on my farm. Mine will be portable enough to load in the back of a pickup and take anywhere.

And, NO!, I won't build one for someone else to have and operate. Question of liability. I don't take responsibility for others experimentation or operation. I'm confident of my own abilities.... not yours.

- - - -

On January 23, 2011 6:14 PM MST, Lawrence added:

[...] This system requires only hydrogen gas (which I can make in wholesale quantities) and nickel powder which I can stockpile. A few pounds will last decades, a century or more....and I can teach my wife how to charge the chamber with nickel powder and hydrogen...then just flip a switch on the filament heater.

I make the hydrogen gas from aluminum wire cut into pellets and dropped into a distilled water/potassium hydroxide (lye) 50/50 solution. I have miles of aluminum wire I salvaged and bags of potassium hydroxide powder to mix in black plastic 55 gallon chemical drums.

You see, I can run the IC motors on my water well pump or one of my electrical generators off the resultant Brown's gas, and when trapped in a column, the hydrogen gas can be separated from the oxygen with DC current and purified....so I can get 100% pure hydrogen gas for the hydrogen/nickel catalytic fusion reactor.

It's a matter of what I have on hand available right now.

I have high pressure aircraft grade aluminum tubing for heat exchanger/water steam flash generator. I have several flanged stainless steel flasks for the reaction chamber I picked up surplus in the oil and gas industry around me.

So, I have the materials to make the fusion system work and now I have the time if I can stay healthy and mobile.

See also

LENR FOOTER:

LENR NEWS, BLOGS, MAGAZINES:

LEADING LENR COMPANIES:

LENR GENRES:

RELATED:

- Other Directory listingsLatestA-IJ-RS-ZTreeNews
- PESWiki home page

Personal tools

Departments
Sponsored Links

Support
Toolbox