PowerPedia:Diesel

From PESWiki

Diesel or diesel fuel is a specific fractional distillate of fuel oil (mostly petroleum) that is used as fuel in a diesel engine invented by German engineer Rudolf Diesel. The term typically refers to fuel that has been processed from petroleum, but increasingly, alternatives such as biodiesel or biomass to liquid (BTL) or gas to liquid (GTL) diesel that are not derived from petroleum are being developed and adopted.

Petroleum diesel

Diesel is produced from petroleum, and is sometimes called petrodiesel when there is a need to distinguish it from diesel obtained from other sources such as biodiesel. It is a hydrocarbon mixture, obtained in the fractional distillation of crude oil between 250 °C and 350 °C at atmospheric pressure.

The density of diesel is about 850 grams per liter whereas gasoline (British English: petrol) has a density of about 720 g/l, about 15% less. When burnt, diesel typically releases about 40.9 megajoules (MJ) per liter, whereas gasoline releases 34.8 MJ/L, also about 15% less. Diesel is generally simpler to refine than gasoline and often costs less (although price fluctuations sometimes mean that the inverse is true; for example, the cost of diesel traditionally rises during colder months as demand for heating oil, which is refined much the same way, rises).

Diesel powered cars generally have about a 40% better mileage than equivalent gasoline engines [1] and produce only about 69% of the greenhouse gases. This greater fuel economy is due to the higher per-liter energy content of diesel fuel and also to the intrinsic efficiency of the diesel engine. While diesel's 15% higher volumetric energy density results in 15% higher greenhouse gas emissions per liter compared to gasoline, the 40% better fuel economy achieved by modern diesel-engined automobiles offsets the higher-per-liter emissions of greenhouse gases, resulting in lower CO2 emission per kilometer (69% of that of gasoline). [2][3] For this reason, proponents of diesel powered automobiles often cite this advantage as a way to reduce Greenhouse gas emissions.

On the other hand, diesel fuel often contains higher quantities of sulfur. European emission standards and preferential taxation have forced oil refineries to dramatically reduce the level of sulfur in diesel fuels. In contrast, the United States has long had "dirtier" diesel, although more stringent emission standards have been adopted with the transition to ultra-low sulfur diesel (ULSD) starting in 2006 and becoming mandatory on June 1, 2010 (see also diesel exhaust). U.S. diesel fuel typically also has a lower cetane number (a measure of ignition quality) than European diesel, resulting in worse cold weather performance and some increase in emissions. High levels of sulfur in diesel are harmful for the environment because they prevent the use of catalytic diesel particulate filters to control diesel particulate emissions, as well as more advanced technologies, such as nitrogen oxide (NOx) adsorbers (still under development), to reduce emissions. However, lowering sulfur also reduces the lubricity of the fuel, meaning that additives must be put into the fuel to help lubricate engines. Biodiesel is an effective lubricant.

Chemical composition

Petroleum derived diesel is composed of about 75% saturated hydrocarbons (primarily paraffins including n, iso, and cycloparaffins), and 25% aromatic hydrocarbons (including naphthalenes and alkylbenzenes). The average chemical formula for common diesel fuel is C₁₂H₂₆, ranging from approx. C₁₀H₂₂ to C₁₅H₃₂.

Algae, microbes, and water

There has been a lot of discussion and misinformation about algae in diesel fuel. An algae is a protist, and it requires sunlight to live and grow. As there is no sunlight in a closed fuel tank, no algae can survive there. However, some microbes can survive there. They can feed on the diesel fuel.

These microbes form a slimy colony that lives at the fuel/water interface. They grow quite rapidly in warmer temperatures. They can even grow in cold weather when fuel tank heaters are installed. Parts of the colony can break off and clog the fuel lines and fuel filters.

It is possible to either kill this growth with a biocide treatment, or eliminate the water, a necessary component of microbial life. There are a number of biocides on the market, which must be handled very carefully. If a biocide is used, it must be added every time a tank is refilled until the problem is fully resolved.

Biocides attack the cell wall of microbes resulting in lysis, the death of a cell by bursting. The risk of filter clogging may continue for a short period after biocide treatment until cellular residues break down and are absorbed into the fuel.

Synthetic diesel

Wood, straw, corn, garbage, and sewage-sludge may be dried and gasified. After purification the Fischer Tropsch process is used to produce synthetic diesel. Other attempts use enzymatic processes and are also economic in case of high oil prices. Synthetic diesel may also be produced out of natural gas in the GTL process or out of coal in the CTL process. Such synthetic diesel has 30% less particulate emissions than conventional diesel (US- California).

Biodiesel

Main article: Biodiesel Biodiesel can be obtained from vegetable oil (vegidiesel / vegifuel), or animal fats (bio-lipids, using transesterification). Biodiesel is a non-fossil fuel alternative to petrodiesel. It can also be mixed with petrodiesel in any amount in modern engines, though when first using it, the solvent properties of the fuel tend to dissolve accumulated deposits and can clog fuel filters. Biodiesel has a higher gel point than petrodiesel, but is comparable to diesel #2. This can be overcome by using a biodiesel/petrodiesel blend, or by installing a fuel heater, but this is only necessary during the colder months. There have been reports that a diesel-biodiesel mix results in lower emissions than either can achieve alone. A small percentage of biodiesel can be used as an additive in low-sulfur formulations of diesel to increase the lubricity lost when the sulfur is removed.

Chemically, most biodiesel consists of alkyl (usually methyl) esters instead of the alkanes and aromatic hydrocarbons of petroleum derived diesel. However, biodiesel has combustion properties very similar to petrodiesel, including combustion energy and cetane ratings. Paraffin biodiesel also exists. Due to the purity of the source, it has a higher quality than petrodiesel.

Ethanol can be added to petroleum diesel fuel in amounts up to 15% along with additives to keep the ethanol emulsified. [4], however the cetane rating and lubricity of the fuel are both reduced and must be corrected with additives.

Applications

Internal Combustion Engines

Diesel engines are a type of internal combustion engine. Rudolf Diesel originally designed the diesel engine to use vegetable oils as a fuel in order to help support agrarian society and to enable independent craftsmen and artisans to compete with large industry.[5] [6] Diesel engines are used in cars, trucks, motorcycles, boats and locomotives.

Packard diesel motors were used in aircraft as early as 1927, and Charles Lindbergh flew a Stinson SM1B with a Packard Diesel in 1928. A Packard diesel motor designed by L.M. Woolson was fitted to a Stinson X7654, and in 1929 it was flown 1000 km non-stop from Detroit to Langley, Virginia (near Washington, D.C.). In 1931, Walter Lees and Fredrick Brossy set the nonstop flight record flying a Bellanca powered by a Packard Diesel for 84h 32m. The Hindenburg was powered by four 16 cylinder diesel engines, each with approximately 1200 horsepower available in bursts, and 850 horsepower available for cruising.

The very first diesel-engine automobile trip was completed on January 6, 1930. The trip was from Indianapolis to New York City, a distance of nearly 1300 km. This feat helped to prove the usefulness of the internal combustion engine.

Automobile racing

In 1931, Dave Evans drove his Cummins Diesel Special to a nonstop finish in the Indianapolis 500, the first time a car had completed the race without a pit stop. That car and a later Cummins Diesel Special are on display at the Indianapolis Motor Speedway Hall of Fame Museum.

With turbocharged Diesel-cars getting stronger in the 1990s, they were entered in touring car racing, and BMW even won the 24 Hours Nürburgring in 1998 with a 320d. After winning the 12 Hours of Sebring in 2006 with their Diesel-powered R10 LMP, Audi won the 24 Hours of Le Mans, too. This is the first time a Diesel-fueled vehicle has won at Le Mans against cars powered with regular fuel or other alternative fuel like methanol or bio-ethanol. Competitors like Porsche predicted this victory for Audi as current FIA and ACO regulations are seen as pro-diesel. French automaker Peugeot is also planning to enter a diesel powered LMP in 2007.

In an effort to further demonstrate the potential of diesel power, California-based Gale Banks Engineering [7] designed, built and raced a Cummins-powered pickup at the Bonneville Salt Flats in October 2002. The truck set a top speed of 222 mph and became the world’s fastest pickup, and almost equally as notable, the truck drove to the race towing its own support trailer.

On 23 August 2006, the British-based earthmoving machine manufacturer JCB raced the specially designed JCB Dieselmax car at 350.092 mph/563.418 km/h. The driver was Andy Green. The car was powered by two modified JCB 444 diesel engines.

Other uses

Bad quality (high sulfur) diesel fuel has been used as a palladium extraction agent for the liquid-liquid extraction of this metal from nitric acid mixtures. This has been proposed as a means of separating the fission product palladium from PUREX raffinate which comes from used nuclear fuel. In this solvent extraction system the hydrocarbons of the diesel act as the diluent while the dialkyl sulfides act as the extractant. This extraction operates by a solvation mechanism. So far neither a pilot plant or full scale plant has been constructed to recover palladium, rhodium or ruthenium from nuclear wastes created by the use of nuclear fuel.

Taxation

Diesel fuel is very similar to heating oil which is used in central heating. In Europe, the United States and Canada, taxes on diesel fuel are higher than on heating oil due to the fuel tax, and in those areas, heating oil is marked with fuel dyes and trace chemicals to prevent and detect tax fraud. Similarly, "untaxed" diesel is available in the United States, which is available for use primarily in agricultural applications such as for tractor fuel. This untaxed diesel is also dyed red for identification purposes, and should a person be found to be using this untaxed diesel fuel for a typically taxed purpose (such as "over-the-road", or driving use), the user can be fined US$10,000. In the United Kingdom it is known as red diesel, and is also used by agricultural vehicles. Diesel fuel, or Marked Gas Oil is dyed green in the Republic of Ireland. The term DERV (short for "diesel engined road vehicle") is also used in the UK as a synonym for diesel fuel. In India, taxes on diesel fuel are lower than on gasoline as majority of the transportation that transports grains and other essential commodities across the country runs on diesel.

Related

• Biodiesel
• Biomass to liquid
• Common ethanol fuel mixtures
• Diesel hybrid vehicle.
• Diesel particulate matter
• Liquid fuels
• List of diesel automobiles
• Ultra-low sulfur diesel

External articles and references

• DieselNet.com: US Diesel Fuel
• Alternative Diesel Fuels - Tutorial on using renewable biofuels in a diesel engine
• U.S. Department of Labor Occupational Safety & Health Administration: Safety and Health Topics: Diesel Exhaust
• Wikipedia contributors, Wikipedia: The Free Encyclopedia. Wikimedia Foundation.
• US Environmental Protection Agency. 2005. Emission Facts: Average Carbon Dioxide Emissions Resulting from Gasoline and Diesel Fuel. Washington, DC: United States Environmental Protection Agency
• Agency for Toxic Substances and Disease Registry (ATSDR). 1995. Toxicological profile for fuel oils. Atlanta, GA: U.S. Department of Health and Human Services, Public Health Service
• http://www.fas.usda.gov/pecad/highlights/2005/01/btl0104/syntheticdiesel.htm. Retrieved on December 5, 2005. appears to be at this link http://www.fas.usda.gov/pecad2/highlights/2005/01/btl0104/syntheticdiesel.htm now
• SYNTHETIC DIESEL FUEL. Retrieved on December 5, 2005.
• Indianapolis Motor Speedway. Retrieved on December 5, 2005.
• Torgov, V.G. ; Tatarchuk, V.V. ; Druzhinina, I.A. ; Korda, T.M. et. al, Atomic Energy, 1994, 76(6), 442-448. (Translated from Atomnaya Energiya; 76: No. 6, 478-485 (Jun 1994))
• United States Government Printing Office (2006-10-25). Title 26, § 48.4082-1 Diesel fuel and kerosene; exemption for dyed fuel.. Electronic Code of Federal Regulations (e-CFR). Retrieved on 2006-10-28. “Diesel fuel or kerosene satisfies the dyeing requirement of this paragraph (b) only if the diesel fuel or kerosene contains— (1) The dye Solvent Red 164 (and no other dye) at a concentration spectrally equivalent to at least 3.9 pounds of the solid dye standard Solvent Red 26 per thousand barrels of diesel fuel or kerosene; or (2) Any dye of a type and in a concentration that has been approved by the Commissioner.? Cited as 26 CFR 48.4082-1. This regulation implements 26 U.S.C. § 4082-1.

See also