PESWiki.com -- New Energy Technology Wiki -- your publicly editable site. Power to the people!

PowerPedia:Bourke engine

From PESWiki

See Directory:Bourke Engine for a directory listing

The Bourke engine is an internal combustion engines of a special type, certain features of which were the subjects of U.S. Pat. Nos. 2,122,676, 2,122,677 and 2,172,670. Apparently, the Bourke design has shortcomings, which Melvin Vaux, who worked with Bourke, has addressed in a series of patents produced in the 1990s. This approach to fuel economy may be more plausible than the vaporizer technologies, which create pockets of highly explosive fumes. The Bourke engine can easily, and perhaps even optimally, run on hydrogen (which can be produced from water), as well as Biodiesel or other less clean but renewable fuels such as methane from garbage.

Table of contents

[edit]

Introduction

Reitz presents an improved "Bourke" type engine, certain features of which are disclosed by Bourke The Bourke engine is more fully described in a publication entitled "Bourke Engine Documentary" by Lois Bourke. In the Bourke type engine at least two cylinders are oppositely disposed so that the free ends of a piston rod extending from pistons reciprocable in the cylinders are connected by a yoke and the pistons reciprocate as a unit. The yoke has means rotatably engaging a rotating crank by which force developed by reciprocation of the pistons is converted to rotating driving motion. In Reitz's improvements, the inner end of the piston rod is placed in abutment with the underside of the piston head and the yoke is modified to house a block slider instead of a rolling bearing to provide better bearing surfaces and lubrication thereof.

Russell Bourke with one of his engines. Photo by Bob Lipman.

[edit]

History

The Bourke engine, first demonstrated by inventor Russell Bourke, in 1932, but lost in the politics of wartime manufacturing, optimizes the 90 degree optimal torque angle for converting combustion to movement, improves fuel efficiency over the 4-stroke engine by 300%, while (depending on design) reducing wear, noise, vibration, as well as cutting noxious emissions to nearly zero because of its efficient use of the fuel. Numerous contemporary replications have demonstrated its viability.

Timeline: 1918, Bourke convinced 4-cycle paradigm was all wrong.; 1932, Bourke built first working model. The engine passed the Air Corps tests, was recommended to the engineering department in Washington D.C., but got lost in red tape, lost in the commotion with the bombing of Pearl Harbor. Freeze order came to only produce things already in production. His wife developed a crippling arthritis which kept Bourke from pursuing the design for years.; 1957, Patents run out, making technology public domain so anyone can manufacture it.; 1961, Bourke induced to build large engine, but investors took over rights within a few years; the device never arrived in market.

[edit]

Description

The principal Bourke engine comprises the three United States patents and publication heretofore identified, together with a patent application Ser. No. 726,321, filed May 18, 1934, by Russell L. Bourke, which is referred to in U.S. Pat. No. 2,122,676, but on which application no patent ever appeared to have issued; and various engines made and operated as described in said publication. In embodiment in the art, the Bourke engine, in which cylinder pairs have pistons that are coupled together, has apparatus coupling the pistons permitting a section of a crank shaft to move freely in a direction perpendicular to the motion of the pistons. The combination of the motion of the pistons in one direction coupled with the capability of the crank shaft motion in a perpendicular direction, permits the linear motion of the pistons to be converted to circular motion of the crank shaft.

It is well known by persons familiar with the Bourke engine that it is comprised of pairs of cylinders with each pair coaxially aligned and disposed back to back with the piston rods extending from the pistons reciprocating in each of these cylinders also coaxially aligned and being joined by a yoke. The center of the yoke is transversely slotted to receive the throw of a crank so that, as each pair of pistons and their yoke-joined piston rods reciprocate as a unit, the crank throw will not only be reciprocated with and in the direction of the yoke, but it will also reciprocate transversely in the yoke slot. Thereby there is imparted to the crank shaft the desired rotary driving motion from the reciprocation of the paired pistons which are interconnected through their rods and the yoke to move reciprocally as a unit.

While the theory and principle of operation of the Bourke engine are such that this engine offers many advantages over more conventional internal combustion engines, certain mechanical problems have been observed in Bourke type engines which have heretofore been built and tested, and these problems appear to have contributed to the apathy of engine builders toward the Bourke engine. Among these problems have been:

The piston rods have been secured internally from the piston head in such a manner that the full thrust load of the piston has been carried by each of (a) a pin passed diametrically through the piston walls; (b) a yoke on such pin; and (c) a wrist pin passed transversely through the end of the piston rod and said piston yoke. Over long sustained operation of the engine, it is felt that such load carrying pins and yoke may be subject to such possible metal fatigue as to cause a fracture of any one of them with resulting serious damage to the engine. In addition, the pin extending through the piston walls has not been anchored against axial displacement so that such displacement can occur, and when it does, one end of the pin may gouge the wall of the cylinder in which the piston is reciprocating.
It has also been found that in Bourke engines heretofore built and tested there has been created an undesired side loading effect as the piston reciprocates in its cylinder. This is because, at least in part, of the articulated manner in which the piston thrust load has been conducted to the piston rod through the pins and yoke described in the preceding paragraph.
In the yoke and crank throw assemblies of Bourke engines heretofore constructed and operated, the theory of construction and assembly has been to provide a roller load bearing which rolls first in one direction; then, after rolling a certain distance, reverses its direction of roll and then rolls for such predetermined distance in the opposite direction transversely of the axis of movement of the piston, piston rod and yoke assembly. It has been found in practice, however, that, as the engine speed increases, insufficient time is provided to enable the roller bearing to reverse its direction of roll within the yoke slotting. As a result, the driving load is imposed on limited arcuate surfaces to cause wear to the same and to develop high frictional losses.

The foregoing problems appear to be among those which appear as yet to have prevented widespread acceptance of the Bourke engine construction among engine builders and automotive companies, despite the many advantages which the Bourke engine construction and its operation offers over present popular engine designs.

[edit]

Related Patents

Bourke

U.S. Patent 2122676 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=2122676) (G.patent (http://www.google.com/patents?q=2122676); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=2122676)) July 1938, Bourke
U.S. Patent 2122677 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=2122677) (G.patent (http://www.google.com/patents?q=2122677); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=2122677)) July 1938, Bourke
U.S. Patent 2172670 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=2172670) (G.patent (http://www.google.com/patents?q=2172670); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=2172670)) September 1939, Bourke

Other

U.S. Patent 545502 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=545502) (G.patent (http://www.google.com/patents?q=545502); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=545502)) September 1895, Hennegin
U.S. Patent 785713 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=785713) (G.patent (http://www.google.com/patents?q=785713); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=785713)) March 1905, Clark
U.S. Patent 1045505 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=1045505) (G.patent (http://www.google.com/patents?q=1045505); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=1045505)) November 1912, Brauer
U.S. Patent 1073656 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=1073656) (G.patent (http://www.google.com/patents?q=1073656); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=1073656)) September 1913, Barker
U.S. Patent 1123172 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=1123172) (G.patent (http://www.google.com/patents?q=1123172); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=1123172)), December 1974, Compton
U.S. Patent 1201401 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=1201401) (G.patent (http://www.google.com/patents?q=1201401); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=1201401)) October 1916, Weatherway
U.S. Patent 1399666 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=1399666) (G.patent (http://www.google.com/patents?q=1399666); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=1399666)), December 1921, Short
U.S. Patent 1636612 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=1636612) (G.patent (http://www.google.com/patents?q=1636612); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=1636612)), July 1927, Noah
U.S. Patent 1687744 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=1687744) (G.patent (http://www.google.com/patents?q=1687744); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=1687744)), October 1928, Webb
U.S. Patent 1774105 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=1774105) (G.patent (http://www.google.com/patents?q=1774105); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=1774105)) August 1930, Neldnee
U.S. Patent 1825278 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=1825278) (G.patent (http://www.google.com/patents?q=1825278); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=1825278)) September 1931, Marvin
U.S. Patent 2295978 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=2295978) (G.patent (http://www.google.com/patents?q=2295978); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=2295978)), September 1942, Toce et al.
U.S. Patent 2990226 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=2990226) (G.patent (http://www.google.com/patents?q=2990226); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=2990226)) June 1961, Fangman
U.S. Patent 3004810 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=3004810) (G.patent (http://www.google.com/patents?q=3004810); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=3004810)) October 1961, King
U.S. Patent 3357318 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=3357318) (G.patent (http://www.google.com/patents?q=3357318); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=3357318)) December 1967, Packard et al.
U.S. Patent 3517652 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=3517652) (G.patent (http://www.google.com/patents?q=3517652); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=3517652)) June 1970, Albertson
U.S. Patent 3886805 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=3886805) (G.patent (http://www.google.com/patents?q=3886805); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=3886805)), June 1975, Koderman
U.S. Patent 4395977 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=4395977) (G.patent (http://www.google.com/patents?q=4395977); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=4395977)), August 1983, Pahis
U.S. Patent 4485768 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=4485768) (G.patent (http://www.google.com/patents?q=4485768); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=4485768)), December 1984, Heniges
U.S. Patent 4608951 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=4608951) (G.patent (http://www.google.com/patents?q=4608951); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=4608951)), September 1986, White
U.S. Patent 4658768 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=4658768) (G.patent (http://www.google.com/patents?q=4658768); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=4658768)), April 1987, Carson
U.S. Patent 5730099 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=5730099) (G.patent (http://www.google.com/patents?q=5730099); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=5730099)), March 1998, Gillespie
U.S. Patent 5732548 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=5732548) (G.patent (http://www.google.com/patents?q=5732548); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=5732548)), March 1998, Peter-Hoblyn
U.S. Patent 5762040 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=5762040) (G.patent (http://www.google.com/patents?q=5762040); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=5762040)), June 1998, Taipale et al.
U.S. Patent 5791304 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=5791304) (G.patent (http://www.google.com/patents?q=5791304); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=5791304)), August 1998, Taipale
U.S. Patent 6170443 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=6170443) (G.patent (http://www.google.com/patents?q=6170443); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=6170443)), January 2001, Hofbauer
U.S. Patent 6209495 (http://patft.uspto.gov/netacgi/nph-Parser?patentnumber=6209495) (G.patent (http://www.google.com/patents?q=6209495); PDF (http://www.pat2pdf.org/pat2pdf/foo.pl?number=6209495)), April 2001, Warren

[edit]

External articles

G
Web

Sites on Bourke engine (http://www.google.com/search?svnum=50&hl=en&lr=&safe=off&sa=N&tab=wi&q=Bourke+engine)
via Google Search

G
groups

Newsgroups with Bourke engine (http://groups.google.com/groups?svnum=50&hl=en&lr=&safe=off&sa=N&tab=wi&q=Bourke+engine)
via Google Groups

G
Image

Images of Bourke engine (http://www.google.com/images?svnum=50&hl=en&lr=&safe=off&sa=N&tab=wi&q=Bourke+engine)
via Google Image

Y
Image

Images of Bourke engine (http://images.search.yahoo.com/search/images?p=Bourke+engine&fr=FP-tab-web-t&toggle=1)
via Yahoo! Images

Niquette, Paul, "The Bourke Engine" adapted from 101 Words I Don't Use, Sophisticated: The Magazine (1997) available at http://www.niquette.com/books/sophmag/bourke.htm
Bourke Engine Documentary, Lois Burke, pp. 28-45, 54-56, 103-105, 111-115, 142-147; 1968..

Retrieved from "http://peswiki.com/index.php/PowerPedia:Bourke_engine"