-- Pure Energy Systems Wiki:  Finding and Facilitating the Best Exotic Free Energy Technologies


OS: Claus W. Turtur: Zero Point Energy Converter in the Kilowatt Range

From PESWiki

Jump to: navigation, search
 Figure 3: Insertion of trigger-pulses to our zero-point-energy converter, with the purpose to make the adjustment between the mechanical resonance and the electrical resonance stable in time (phase lock)(Source: Philica)
Figure 3: Insertion of trigger-pulses to our zero-point-energy converter, with the purpose to make the adjustment between the mechanical resonance and the electrical resonance stable in time (phase lock)
(Source: Philica)

Compiled by Sterling D. Allan
Pure Energy Systems News
February 9, 2011

Professor Claus W. Turtur, Ph.D. from the University of Applied Sciences in Germany has published a theory about how to construct a zero point energy motor the size of a drill that could produce 1 kilowatt of power (enough for ten 100 Watt bulbs), enlarging on small-scale success he has demonstrated and published previously.

The link to the publication is here:

He told me: " I hope you will enjoy to read it and to tell it to everybody - - maybe also to build such a machine."

When I asked the New Energy Congress if they thought I should feature it, Sepp Hasslberger wrote:

Certainly yes, I would say.
Turtur will not make a commercial apparatus, but he is a highly regarded theoretician who proved zero-point energy conversion in a published paper. Turtur lacks the go-getter attitude we often see in the US, but he is very serious about advancing the field. He's been a speaker at several of the conferences about new energy in the German speaking area...
His first proofs were in the milliwatt/microwatt range. Going the rotating magnet way allows him to demonstrate commercially useful ZP energy production. Plus he says how he did it, in a way that can be followed by other experimenters and with parameters that allow duplication and - later - optimization. Basically, we have an open source ZPE converter that works, if the words of Turtur can be believed.
I think the linking of mechanical and magnetic oscillation into synchronicity is genius, and will open the field to great future developments.

The title of the article is DFEM-Simulation of a Zero-point-energy Converter with realisable Dimensions and a Power-output in the Kilowatt-range.

Here's the Abstract:

In precedent work, the author presented a method for the theoretical computation of zero-point-energy converters, called Dynamic Finite-Element-Method (DFEM). In several articles some examples for the conversion of zero-point-energy have been demonstrated, which deliver an output power in the Nanowatt- or in the Microwatt- range, which is a fundamental proof of the principle, but not sufficient for any technical application.
The way towards a powerful zero-point-energy converter in the Kilowatt-range needed some additional investigation, of which the results are now presented. Different from former fundamental basic research, the new converter has to be operated magnetically, because the energy-density of magnetic fields is much larger the energy-density of electrostatic fields, namely by several orders of magnitude.
In the article here, the author presents step by step the solution of the theoretical problems, which now allows the theoretical construction of a zero-point-energy converter in the Kilowatt-range. The result is a model of a zero-point-energy motor with a diameter of 9 cm and a height of 6.8 cm producing 1.07 Kilowatts.


Official Websites

We offer this PESWiki page as a home page for this open source project.

Key Articles


Turtur Zero Point Energy Rotor

An (earlier) electrostatic rotor converting the zero point energy of the vacuum into classical mechanical energy.

Replication Progress

please list here

Claus W. Turtur Bio

Fachbereich Elektrotechnik, University of Applied Sciences Braunschweig-Wolfenbuettel, Germany

Correspondence with Turtur

February 15, 2011 1:22 AM MST

From: turtur
To: Sterling Allan
Cc: Turtur ZPE project egroup
Sent: Tuesday, February 15, 2011 1:22 AM
Subject: Re: ZPE-motor with 1.07 kW

Dear Sterling Allan,

I am sorry to tell you, that I do not have the time to join any forum.

I am filled up with work (teaching and administration) here in my university so much, that there almost no time for reading Emails. I can read Emails twice per month (for instance today).

But I like to give you all the information to help you. You can phone me: (++49) 5331 / 939 - 42220

Today in the morning, I got an Email and I sent this answer. Maybe this helps you:

Dear colleagues,

I can not join any discussion group at all, because I have extreme work overload (100 hours per week). But if you ask me questions, I will answer them via Email.

If you give me your phone number, I can phone you and speak about the project. Telephone is very efficient for information exchange.

Let me start with a short explanation:

It is sensible to get the magnet first. The best choice for the magnetic field is according to fig.13 in the attached article. The magnet has to rotate with several thousand rounds per minute. So -> Get a good bearing, mount the magnet and get it balanced in a good way that it can rotate with for instance 10 000 rpm without too strong imbalance.

Then measure the field strength and give me the measuring value. I will do the computation to tell you, which coil and which capacitor you need. Due to the capacitor you will have probably much less than 1600 windings in the coil (as in the publication). You can also try to do the computation by yourself, because the source-code and the EXE-version of my DFEM-algorithm is for free download at:

Please feel free to forward this information to everybody you like. You can post it in the internet if you like.

Related Articles by Turtur

In the News

  • OS / Best Exotic FE: ZPE > Turtur 1 kW OS >
    Can Zero Point Energy Gain Credibility? - Claus W. Turtur and Wolfram Knapp think they have devised a device that can harvest the ZPE and get some mechanical energy activity. Their explanation requires considerable mathematics and physic skills. It’s quite a lot to digest and the presentation lends no sound bite type material for the lazy journalist. (OilPrice quoting New Energy and Fuel; February 21, 2011)
  • Featured / OS / Best Exotic FE: Zero Point Energy >
    Turtur Proposes a Zero Point Energy Converter in the Kilowatt Range - Professor Claus W. Turtur from the University of Applied Sciences in Germany has published a theory about how to construct a zero point energy motor the size of a drill (9 cm diameter x 6.8 cm) that could produce 1 kilowatt of power, enlarging on small-scale success he has demonstrated and published previously. (PESWiki and PESN and BeforeItsNews; February 9, 2011)

Other Coverage

  • Claus Turtur - Dr. Claus W. Turtur works out of the university of applied sciences Braunschweig-Wolfenbüttel. On his website Dr Claus has openly published the verification ... (Panacea-BOCAF)


ZPE_Turtur kW Project Forum

  • - A forum to discuss the open sourcing of Prof. Dr. Claus W. Turtur's proposed 1 kilowatt range zero point energy technology which links mechanical and magnetic oscillation into synchronicity. The objective will be to build, replicate, characterize, optimize, improve, and eventually commercialize this technology. (Launched by PES, Feb. 9, 2011)

Other Discussions on this Topic

  • Interesting paper - Has anyone looked at this paper by Claus Turtur. It is called a "A Motor driven by Electrostatic Forces". ... Turtur, Claus W. (2007). (Physics Forums; Oct. 3, 2008)

Progam calculating 1 KW output

On February 15, 2011 11:21 AM MST, Andrzej Pruszynski of Switzerland wrote:

I did check Professor Turtur progam calculating 1 KW output from a rotating magnet / coil setup. I had to convert it first from Pasca (found in one of PDF documents he produced) to Lua in order to be able to play with parameters. Alas his program contains a flaw in integration of results. This is why when you lower the integration step (dt) to 10, 100 or 1000 smaller value, the effect of energy generation vanishes.

He did post today his own compiled program and parameter sheet:

You can try by yourself and play with 'dt' value, but it seems that there is no easy way to get this ZPE strait-on.

I alerted professor Turtur about it, but he said he has no time to look into there before end of March. This is a way too late, for potential experimenter loosing his time and money.


Prof. Dr. Claus W. Turtur
University of Applied Sciences Braunschweig-Wolfenbüttel Salzdahlumer Straße 46/48
Germany - 38302 Wolfenbüttel
Tel.: (++49) 5331 / 939 - 3412
Email: (doesn't check very often, and now that it's getting innundated, he doesn't respond at all, per the following message.

Received March 04, 2011 1:18 AM in response to an email sent February 13, 2011 2:48 PM

"Dear colleagues, Dear friends, I am very sorry that I have to ask you for indulgence: Due to massive overload, I am not able to read or to answer Emails since January 2011. There are too many Emails, and I do not have anybody to help me. In this situation I have no other choice, I must beg your pardon that I cannot write an answer for you.
"Cordial greetings, Claus Turtur"

See also




- Other Open Source Projects
- Open Source News
- PESWiki main index
- PES Network Inc.

Personal tools

new today

Sponsored Links


  • Events

  • Departments
    Sponsored Links