From PESWiki

CLaNZeR's replication of Mylow's Magnet Motor as part of the open source project.

Status

Planning to build stator assembly March 29. Stator magnet is not a very close match to the one used by Mylow, but it may work.

CLaNZeR's Site

• http://www.overunity.org.uk - CLaNZeR Playing with Magnets
  • http://www.overunity.org.uk/mylo/index.html - MYLOW's Magnetic Motor based on Howard Johnson's Design
    • CLaNZeR's Replication of Mylow's Magnet Motor - "I Plan to start replicating Mylow's Motor this weekend coming (28/03/2009) My Aluminium Disk and same Rotor Magnets as Mylow's should arrive by then. Will Post Updates as I go along.

Videos

Part 3: Stator Magnet Up Against Rotor Mangets

(4:26 minutes)

• Clanzers Mylow HJ Replication Part3 - Clanzers first impressions of the Stator magnet up against the Disk. In the Video Clanzer states the space between the sets of 3 as a TWO space, This should be THREE space but he could not be bothered to shoot the Video again! (YouTube; March 29, 2009)

- - - -

Part 2: Disc Wind-down with Rotor Magnets Attached

(8:41 minutes)

• Clanzers Mylow HJ Replication Part 2 - Wind-down takes 7.5 minutes from 100 rpm, which shows that the extra weight helps with the flywheel effect at lower rpms. (YouTube; March 29, 2009)

- - - -

Part 1: Aluminum Disc Wind-down Time

(9:57 minutes)

• Clanzers Mylow HJ Replication Part 1 - CLaNZeR posts a baseline video showing the wind-down time of just the aluminum disk, without any magnets affixed, from 200 RPM.(YouTube; March 28, 2009)

Images

After glueing magnets on and ripping them off a few times. This is the combination that I decided on.

- - - -

Have used two bearings to make it more stable, but they are not that loose but will do the Job.

- - - -

Materials Sources

On March 29, 2009, Sean wrote:

http://eclipse-magnetics.co.uk/product/magnet-materials/cast-alnico/minor

Part number M4144ANK at £0.90 each

You can now see how my layout fits with the 8mm wide Rotor magnets I have.

The stators are E824 the closest I could get to Mylow's at the time

http://eclipse-magnetics.co.uk/product-categories/magnets/castalnicomagnets/buttons

The Rotor I got a CNC shop in UK to do for me.

Latest

March 29, 2009

I did a quick WindDown from 100 RPM which came out at around 7.5 Minutes. The extra weight of the Rotor magnets make a big difference at lower revs.

I wanted to make the Stator Arm out of Aluminium and thought I had some 20mm Box section in the workshop, but seems I have used that for something else. So for now I used some extruded Aluminium I had hanging around.

Posted a video showing my first impressions of the Stator magnet up against the disk.

March 28, 2009

Aluminium Disk has arrived , so off to get it mounted

March 27, 2009

Magnets turned up. The Channel is not as deep as Mylow's ones and not as wide, but nearest I could get for now. The two test stator magnets have N and S poles on the flat edges

See also

• OS:MYLOW:Replications

• OS: MYLOW's Magnetic Motor based on Howard Johnson's Design - Project Home Page
  • Latest • After the Hoax • Videos • Plans • FAQ • Replications • Correspondence (History) • Theory • Strategy • Legal • Forums • In the News • Related Sites • Contact

• Directory:Magnet Motors
• Directory:Galactic Sea of Energy

- Other Open Source Projects
- PESWiki home page