PESWiki.com -- Pure Energy Systems Wiki:  Finding and Facilitating the Best Exotic Free Energy Technologies







    

Free Energy Blog:2013:December:18-24

From PESWiki

Jump to: navigation, search

Free Energy Blog posts from December 18-24, 2013

Contents

Latest

Blog Archive

Going Forward

Free Energy Blog:2013:December:25-31

Merry Christmas, everyone

Permalink


Whether or not you come from a Christian background, most of us can see the value of the positive things associated with Christmas: the spirit of giving, caring, sharing, caroling, social gatherings.

Cheri is great at making Christmas a special time for our family. I couldn't ask for a better companion.

We went sledding yesterday and cleared the snow off a nearby pond to go ice skating.

We at PES Network wish you all a very merry Christmas.

p.s. By way of commentary, I must say that it seems to me that the commercialization of Christmas has turned it into a junk fest to a certain extent, where much of what people get for each other is unnecessary, un-needed, not very appreciated, and quickly ends up in the junk yard, even as the slave labor that made it possible for such a low price is not comprehended.

-- SilverThunder 21:17, 24 December 2013 (UTC)

Infographic on Thane Heins' system

Permalink
Relevance: Directory:Electromagnetic > Thane Heins

I received this comment from Julien Victor Marre via our Facebook channel.

I wanted your opinion, if possible, on the infographic I made, based on a theory of [Thane] Heins, about how "QMoGen" work.
I hope I painted it clear enough.
Thanks for reading my message.
Regards from south-west France, Julien.

Image:Thane-Heins_explanation_by_Julien_1200.jpg

- - - -

Thane Heins responded:

From: thaneh...
To: Sterling D. Allan - Pure Energy Systems
Sent: Tuesday, December 24, 2013 5:53 PM
Subject: Re: Infographic on Thane Heins' system


Hello Sterling Merry Christmas,
Its close but not exact.
This document shows how the current flow in the ReGenX Coil is delayed by 45 degrees when compared to a conventional generator coil on the same physical position relative to the rotor magnetic fields...
The current delay in the ReGenX coil means that the Lenz repelling magnetic field manifests its full magnetic field when the rotor magnet is moving away from the coil rather than approaching it. This accelerates the rotor magnets departure while simultaneously attracting the opposite rotor magnetic pole as identified in the info graphic...
A small Lenz portion does occur prior to the 45 degree mark but it's NET effect is minimal.
This same current delay occurs in the BiTT and was identified in computer simulations by Rob Woundenberg of Phillips in Holland (aka "Hob Nire") which leads to infinities exceeding 60,000% (page 4). In reality the BiTT efficiency is infinite but the computer could not compute any higher.
http://www.slideshare.net/mobile/ThaneCHeins/femm-bi-tt-simulation-1
Cheers and Merry Christmas & Happy New Year!
Thane
PS We gave a demo to local business leaders who own a 60,000 sq ft factory in NY who want to begin manufacturing ReGenX Motors and BiTT in 2014...

-- SilverThunder 17:07, 24 December 2013 (UTC)

Vasmus - СЕ Generator: Another Kapanadze Replication?

Permalink
Relevance: Directory:Electromagnetic > Directory:Kapanadze Free Energy Generator


Deggory from India brought this one to our attention. "Wesley News", apparently, provides an English explanation of a video posted in another language (Russian / Georgian?). [That guess is derived from the Russian word for "generator" (according to Google translate) in the video description.]

Deggory wrote:

"I think its best device shown till now in solid state. I believe he will show the circuit soon."
  • Wesley News :Vasmus - СЕ Generator was put in question - is his device real. We will see what is going to be next (YouTube; December 20, 2013)

-- SilverThunder 16:28, 24 December 2013 (UTC)

IRS 3520: Insider's Best-Kept Secret for Receiving Piles of Money Tax-Free, Non-Reported

Posted this last night:

-- SilverThunder 16:42, 24 December 2013 (UTC)

MSV Explorer QMoGen update

Transition from land to waterThe MSVEX Bobcat’s unique Electro-Bio-Hydraulic and all electric Cat Track Drive Systems, though robust and progressive, are simple to drive and can easily negotiate rough terrain, steep slope and climb out, making it a truly roughed, unique and versatile machine.
Transition from land to water

The MSVEX Bobcat’s unique Electro-Bio-Hydraulic and all electric Cat Track Drive Systems, though robust and progressive, are simple to drive and can easily negotiate rough terrain, steep slope and climb out, making it a truly roughed, unique and versatile machine.

Permalink
Relevance: Electromagnetic > QMoGens > MSV Explorer


On December 17, last year, we posted a feature page about Chris Garner's MSV Explorer that runs on Gyro Generator. We've had this featured near the top of our QMoGen index page because we were hoping it might be one of the first of these to be introducted commercially in the marketplace.

Here's a response I received from him this morning in answer to my question about any updates he might be able to give us. Apparently, some of the concepts are implemented and and commercially available, but not the full "never have to stop to be recharged" aspect yet.


From: Chris Garner
To: sterlingda
Sent: Monday, December 23, 2013 7:07 AM [Mountain]
Subject: Re: any updates?


Hi Sterling
Yes we have created a positive loop energy system which has been installed within [a] trailer pulled by and electric vehicle.
The tests proved conclusively that surplus energy can be generated, however the next step will involve re-defining the system to be able to incorporate into an electric car.
This will be my task for 2014 and will involve considerable investment of both time and money, will keep you posted
Please have a look at our new website as the MSVEX Bigfoot has been part of the loop energy story in testing of supporting components. http://www.msvexplorer.com
Have a good Christmas and New Year
Kindest Regards
Chris Garner
MSVEX

-- SilverThunder 14:54, 23 December 2013 (UTC)

IAUS solar boondogle

Permalink
Relevance: Solar > Concentrated > IAUS


Follow-up from

  • IAUS fresnel lens solar project in Utah called into question - ... company has been touting its "revolutionary" solar technology for years, but its projects in four states have yet to generate any significant power. I've traveled to visit their facility to see it. I wasn't impressed. The fresnel lenses were broken and strewn all over. (Free Energy Blog; December 22, 2013)

I found the photos and video I shot on April 11, 2009. (Had fund digging through old photos and video with the family while looking for this.)

My dad, David W. Allan, and my mother in law, Susan Manning, were with me on that trip to see the IAUS facility west of Delta, Utah.

  • (YouTube / PES Network; December 22, 2013)

-- SilverThunder 04:45, 23 December 2013 (UTC)

IAUS fresnel lens solar project in Utah called into question

Permalink
Relevance: Solar > Concentrated > IAUS


We took another hit yesterday on yet another of the more mainstream clean energy technologies we've featured in the past.

There's an article in Saturday's Deseret News titled: Are Utahn's solar projects just pie in the sky? Claims raise questions in Millard County, elsewhere, with summary:

A Utah company has been touting its "revolutionary" solar technology for years. But its projects in four states have yet to generate any significant power. Millard County officials are particularly frustrated.

The article mentions one of our stories on the second of five pages.

We've featured IAUS in our Top 100, and I've traveled to visit their facility to see it. I wasn't impressed. The fresnel lenses were broken and strewn all over. Randy Johnson told me that they had fixed the vibration/gasket problem in a newer design so this has been resolved, so I held back from publishing a negative report of my visit. I've posted video and photos.

This story is not dissimilar to the Green Power Inc story, in which someone who is touting a revolutionary clean energy solution that could provide energy at a much more affordable price, has been using questional business practices, which look like they may sink the company.

Apparently, the Deseret News has not taken the publishing of this story lightly. The author contacted me for comment on October 25, nearly two months ago.

-- SilverThunder 23:39, 22 December 2013 (UTC)

Green Power CEO to remain in federal custody

Permalink
Relevance: Waste to Energy > Green Power Inc.


This latest story by the Tri-Citiy Herald about the waste-to-energy company, Green Power, Inc., gives a sordid history of what the state prosecution calls "Ponzi-like scheme against the new investors". Here's an excerpt:

Kennewick, Wash. — A Kennewick man accused of wire fraud, aggravated identity theft and money laundering continued a "pattern of deceit" even though he knew he was facing a federal indictment, prosecutors said.
Green Power CEO Michael Spitzauer's request for bail was denied Friday. Magistrate Judge James P. Hutton agreed with prosecution arguments that he presents a flight risk.
...
Spitzauer's Seattle attorney, Christopher Black, said in court documents that "there is nothing untoward about Mr. Spitzauer's attempts to repay investors."
Black argued that Spitzauer is not a flight risk because his wife, Melissa, and four children, ages 10 to 17, live in Kennewick and no one in the family has a valid passport. Spitzauer has not traveled abroad since 1996, he said. His wife and children are U.S. citizens.
...
Spitzauer's lifestyle contradicts his claims of having only $661 in cash, prosecutors allege. In early 2013, he made an offer to purchase a $2.5 million Kennewick home, although he did not end up buying it. His sons have expensive toys, including a Hummer, new gaming systems and more than 100 pairs of athletic shoes.

An abbreviated form of this story also appeared at KHQ.com.


I met with one of Spitzauer's victim investors (several million) at TeslaTech in Albuquerque two years ago. He was very upset at how Spitzauer had treated him. Being generous, at that point, I posted the following statement at the opening of our feature page at PESWiki:

Cautionary Notice: Given the history of this company, we strongly recommend extreme caution in dealing with this company. "I don't think we'll see anything ever come from this company. Spitzauer is too flaky to pull it off." -- Sterling D. Allan, October 8, 2012

I had put up that cautionary notice because it seemed to me that Spitzauer had been using our previously positive coverage as one of his calling cards to court new players.

When Spitzauer contacted me about 1.5 months ago, saying that several plants were now in operation, I figured he must have worked through his problems, both in the technology and the angry investors, but apparently his statement to me about operational plants was not true as well. I was waiting for evidence of this claim before giving him coverage. Now it looks like he'll be ending up behind bars for many years.

From what I know at this point, it seems to me that what we had in Mike Spitzauer was a very flakey person with a great objective who used shadey business methods to pass money between players to try and keep the anxiety down. Over the years, we have given him positive coverage, but we have also covered the negative things that have arisen as well, even though he was a major sponsor of PES. You can see this by reviewing our "In the News" section on the GPI feature page. The "History" tab at the top of the page will give you a way to chronologically review what the page looked like over time.

-- SilverThunder 15:54, 22 December 2013 (UTC)

Another video of Shilov QMoGen

Permalink
Relevance: Directory:Electromagnetic > QMoGen > Vitaly Shilov


Don Paul brought this one to our attention.

Fuelless Generator 1000

  • [Google translate] Began production of fuel-free generator 1000 watts. Changed stabilizer and invector. Added transformer and capacitors. (YouTube; December 7, 2013)

-- SilverThunder 21:41, 21 December 2013 (UTC)

1930/1960 QMoGen and 1882 patents -- It's variants have been around a long time

Permalink
Relevance: Electromagnetic > QMoGens > Emmett Butler


Also posted at Directory:Emmett L. Butler's QMoGen#December 21, 2013: 1930/1960 QMoGen and 1882 patents -- It's variants have been around a long time

From: Butlergrt
To: sterlingda
Sent: Friday, December 20, 2013 8:03 PM
Subject: 1930/1960 QMoGen and 1882 patents,it's variants have been around a long time


Good Evening,
I believe many of you will find this most interesting, if you read it in it's entirety and think about it... Oh the surprises in life! A patent in 1882 and the U.S. Navy.
The QMoGen and it's variants has been around since 1882, less self-looping and then maybe.... To understand my system, you must understand my concept and definition of overunity! A perfect system is (input a = output a) or stated differently (input watts a = output watts a), overunity would be (input watts a = output watts a+1......) Or anything that has a gain over input watts to output watts is overunity to me. Now, the motor powering the generator doesn't, unlike humans, know or care, where the power is coming from, photo-voltaics, the wind generator, a micro hydro-turbine, battery, gasoline or the mains from your public utility -- or the generator that is putting out more watts than the supply motor needs. Do you get what I am trying to get you to understand??!
The QMoGen, as it is called on this site, minus it's current self-loop, it's evolution actually goes back to 1882. In 1928 the concept and theory of a motor to generator with a small input to larger output was discussed in a scientific paper and was called the Metadyne. Altho it was actually patented in 1882 by A.I. Graivier in Paris, later in 1907 by Rosenburg and others in Great Britain and elsewhere, (probably copies but no international patent recognition at that time), my supposition. A variant to this was introduced in 1891 by Harry Ward Leonard, known as the Ward Leonard Controller and used heavily by the U.S. Navy in WWII.
Of these, closest to the QMoGen is the Amplidyne developed in WWII by Mr. Alexanderson in 1943, and also used by the U.S. Navy where it had a 1 watt input and had a 10,000 watt + output and was used, in conjunction, with variants a transformer along with an ac motor and dc generator (REMEMBER: a transformer is really nothing more than a non-moving induction generator) My insert, Emmett nbhmvn
Now when you read the below data, you can see that the 1930/40 and 1960's device is more than possible. I would surmise that these two fellows had either Navy connections or were involved in the original research. Further, on all the systems where you have read, as I, that the motor/generators were modified, on the QMoGen with out stating what they modified, you can almost bet your bottom dollar that they were modified to become Amplidyne's!! The modification is the shorted first set of brushes and the addition of the 2nd set of brushes perpendicular to the first set. Read the Navys manual below! Now go back to the top and read my definition of overunity and you will understand much and if you think the U.S. Navy didn't soon think of self-looping now after 70 + years??!!!, Well................................Come On, gimme a break!
To see this, read: Navy Electricity and Electronics Training Series (NEETS) [1] [2]
Module 5—Introduction to Generators and Motors [3]
Chapter 1: Pages 1-21 through 1-30


AMPLIDYNES
Amplidynes are special-purpose dc generators. They supply large dc currents, precisely controlled, to the large dc motors used to drive heavy physical loads, such as gun turrets and missile launchers.
The amplidyne is really a motor and a generator. It consists of a constant-speed ac motor (the prime mover) mechanically coupled to a dc generator, which is wired to function as a high-gain amplifier (an amplifier is a device in which a small input voltage can control a large current source). For instance, in a normal dc generator, a small dc voltage applied to the field windings is able to control the output of the generator. In a typical generator, a change in voltage from 0-volt dc to 3-volts dc applied to the field winding may cause the generator output to vary from 0-volt dc to 300-volts dc. If the 3 volts applied to the field winding is considered an input, and the 300 volts taken from the brushes is an output, there is a gain of 100. Gain is expressed as the ratio of output to input:
Gain = output/input
In this case 300 V ÷ 3 V = 100. This means that the 3 volts output is 100 times larger than the input. The following paragraphs explain how gain is achieved in a typical dc generator and how the modifications making the generator an amplidyne increase the gain to as high as 10,000.
The schematic diagram in figure 1-22 shows a separately excited dc generator. Because of the 10- volt controlling voltage, 10 amperes of current will flow through the 1-ohm field winding. This draws 100 watts of input power (P = IE).
Image:NEETS_fig1-22_ordinary-DC-generator_rd.gif
Figure 1-22.—Ordinary dc generator.
Assume that the characteristics of this generator enable it to produce approximately 87 amperes of armature current at 115 volts at the output terminals. This represents an output power of approximately 10,000 watts (P = IE). You can see that the power gain of this generator is 100. In effect, 100 watts controls 10,000 watts.
An amplidyne is a special type of dc generator. The following changes, for explanation purposes, will convert the typical dc generator above into an amplidyne.
The first step is to short the brushes together, as shown in figure 1-23. This removes nearly all of the resistance in the armature circuit.
Image:NEETS fig1-23 brushes-shortened-in-a-DC-generator rd.gif
Figure 1-23.—Brushes shorted in a dc generator.
Because of the very low resistance in the armature circuit, a much lower control-field flux produces full-load armature current (full-load current in the armature is still about 87 amperes). The smaller control field now requires a control voltage of only 1 volt and an input power of 1 watt (1 volt across 1 ohm causes 1 ampere of current, which produces 1 watt of input power).
The next step is to add another set of brushes. These now become the output brushes of the amplidyne. They are placed against the commutator in a position perpendicular to the original brushes, as shown in figure 1-24. The previously shorted brushes are now called the "quadrature" brushes. This is because they are in quadrature (perpendicular) to the output brushes. The output brushes are in line with the armature flux. Therefore, they pick off the voltage induced in the armature windings at this point. The voltage at the output will be the same as in the original generator, 115 volts in our example.
Image:NEETS fig1-24 Amplidyne-load-brushes rd.gif
Figure 1-24.—Amplidyne load brushes.
As you have seen, the original generator produced a 10,000-watt output with a 100-watt input. The amplidyne produces the same 10,000-watt output with only a 1-watt input. This represents a gain of 10,000. The gain of the original generator has been greatly increased.
[/END OF NEETS CITATION]
Have a most awesome evening,
Emmett

-- SilverThunder 18:14, 21 December 2013 (UTC)

SEAL Team 6 Was Murdered

Permalink
Relevance: Directory:Conspiracy


7:40 minute video you must see, if you're not already familiar with these facts. Yet another impeachable offense by the Commander In Chief.

  • (YouTube / Western Journalism; Nov 25, 2013)

-- SilverThunder 00:50, 21 December 2013 (UTC)

Russian QMoGen for sale WORKS!

Permalink
Relevance: Electromagnetic > QMoGens > Vitaly Shilov


From: racio77 {at} mail.ru
To: QMoGen@yahoogroups.com
Sent: Friday, December 20, 2013 1:02 PM
Subject: Re: [QMoGen] RE: Fw: another Russian QMogen


Greetings! I just went to those @russian g-m0-gen sellers. Well - it works - at for 1 hour I watched. It consist of 220 v. motor -flywheel -12v (!!!) car generator and akummulator - invertor. NO QUESTIONS ANSWERED :) in nearest time i will go to production line near Moskow to talk to producer (not to dealer). I will keep you informed.

-- SilverThunder 23:16, 20 December 2013 (UTC)

Emmett Butler posts cautions/disclaimer for QMoGen replicating

Permalink
Relevance: Electromagnetic > QMoGens > Emmett Butler


Posted at Directory:Emmett L. Butler's QMoGen#December 20, 2013: Critical Safety Issues / Disclaimer, and quoted in whole here, as these are good warnings to bear in mind in general for anyone experimenting with these kinds of things.


From: Butlergrt
To: sterlingda
Sent: Thursday, December 19, 2013 7:13 PM [Mountain]
Subject: Critical: SAFETY ISSUES


Good Evening,
Subject: SAFETY...THIS IS CRITICAL
This is probably the time for the famous disclaimer paragraph! THIS IS FOR ENTERTAINMENT PURPOSES ONLY! I cannot be responsible for your actions or in-actions; for your success, or lack ther-of, experimental or financial! This is how I build my systems and is for your entertainment only. What you do with it is your own business and responsibility!
1. The power from this system be it dc to dc, dc to ac or ac to ac, CAN and WILL seriously hurt or kill you, deader than a door nail if you are not careful, it is no different than the 110/120 volts and high amps out of your power mains at home!
2. If you are using a battery to a dc to dc system or a battery to dc to ac system, the battery, by it's very nature of releasing hydrogen gas while charging and running is explosive. Wear safety goggles and protective clothing, it wil burn the the "H.E. double toothpicks" out of you and if it gets in your eyes, will either blind you or seriously impair your vision.
3. PLEASE, PLEASE, PLEASE, before you start this, which ever system you use, make sure everything is in shrouds or heavy metal caging. When the system works as you knew it would and had dreamed of, and you are doing your happy dance, whooping and shouting EUREKA! and a friend or family member walks in to see what is going on and that old frayed belt you used instead of a new one or didn't make sure that the gears or pulleys were well fastened and flies off at 1750 +/- for an average dc system or up to 3600 rpm for an average ac system and seriously hurts, blinds or kills them, I PROMISE YOU, you will NEVER/EVER know another exciting or happy moment again for the rest of your life! Every waking minute and in your dreams you will re-live that fatal moment for the rest of your life!
4. Use common sense: I cannot stress this enough. I watched a video on a fellows system after he had gotten the motor running, with is hand, he then attached the belt. Stupid, Stupid, Stupid, depending upon the tension on the belt and if his fingers had gotten caught, they were gone, cut off!!!!!, He was lucky! Yes I lurk! To see where humans are at and debate with myself should I or should I not let them know what is possible. This guy should say his prayers and go to church that he was lucky! DON'T DO THINGS LIKE THIS!!!
5. Have patience!!! You have lived your entire life without this, if you are tired, stressed and things aren't working out like you thought at the moment, give it a break! Take a shower, eat some food, take a nap, go to the gym, spend some quality time with the family, and it will work itself out. Let me give you a personal example that happened to me when you don't follow the rules. It was a very stressful week at the office, no workout at the gym, I had this concept of a new alternative energy device and had started it but hadn't been able to finish it. I had only 1 hole left to drill for the frame work and I could start my experiments. It was 8 in the evening that June, I was tired, hungry and starting to get a little rank. I wanted to go home take a shower, get something to eat and go to sleep, but it was only 1 hole, no problem. So I went to my shop and started to drill, the piece in the vice with a 3/8ths drill bit in the chuck, about half way thru it seemed like I had hit a hard spot! Rather than changing bits or letting the drill and bit do it's work, I pushed harder, lots harder and all of a sudden it went thru!!! YEP, thru the piece and thru my left middle finger with lots of skin, blood and flesh and bone on the bit and on the floor. Now what seemed an eternity, but only a second or two, part of me said you should have gone home, the logic part said with one hand and a couple of fingers you are going to have to reverse the drill and take it back out!! It was probably less than 3 seconds but seemed an eternity! I called my wife who then took me to the emergency ward at the hospital and of course they always ask how this happened, Shaking their heads as they walked away. It was embarressing. Did I say I used to be a fabulous piano player and and an extraordinary typist??!!! Not anymore!!! I have no feeling in my middle finger and it also affects my 4th finger and pinky!
Have a most wonderful evening,
Emmett

-- SilverThunder 22:28, 20 December 2013 (UTC)

Keshe Foundations announces 3-4 kW generator success

Permalink
Relevance: Plasma > Directory:Keshe_Foundation


In my interview last month with Mehran Keshe, he said that on December 19 they would be announcing the results of their recent tests of their generator, whether it was successful or not, and whether or not they would be making it available.

Yesterday I received an email from him with a link to yesterday's announcement as promised. It is post number 168 in their Sale of Keshe Foundation 3-4 KW power generator forum thread commenced April 11, 2011.


Announcement by the Keshe Foundation in respect to the 3_4 KW power generators.
Following the development and testing of new materials for space reactor technology for production of plasma in a non-nuclear reactor in the past months, the Keshe Foundation has achieved successful testing in creating and maintaining plasma in these new generation of reactors that we are satisfied to precede with the production of the power generators using the new phenomena.
As the result of this success, the development and preproduction of commercial energy units in conjunction with the keshe Foundation Italy team has started.
The full production phase will follow in the first weeks of 2014.
The Foundation informs the less than one hundred people around the world who have reserved these power units; the delivery of their systems will be fulfilled as systems are produced in February -March 2014.
We thank you for your patience and trust in the work of the Foundation.
Attaining the national certificate for entry and use of these systems will be up on each individual purchaser.
For European users, they can choose to wait for the delivery up on the Foundation submitting and receiving EU certification or they can arrange for the certification by themselves.
Now that the energy unit tests are completed, The Keshe Foundation will start negotiation with governments around the world for the use and implication of the space Magravs systems for motion in early 2014.
This section of the technology will be released first to governments for them to be able to put effective regulations in place for their further use for transportation and cross borders control.
The reason for this move by the Foundation is that the flight systems can involve national securities and we make sure that no nation is left out or can be affected negatively through this development.
We would like to thank members of the Keshe Foundation Italian team, whom have supported us in finishing the last stages of this reactor devlopment.
At the same time, they have become the developers and the producers, and they will carry out the commercialization of power generators in Italy for the Italian nation.
M T Keshe
The director of the Keshe Foundation
Dec 19, 2013


I sent him the following questions:

Do you have any photos you can provide of the system?
Do you have a sales page where new customers can purchase these?
Do you have test results that we can view?
Do you have product spec sheets?
What about UL / CE certification?


He replied:

From: keshe Foundation
To: Sterling Allan
Sent: Friday, December 20, 2013 2:30 PM [Mountain]
Subject: Re: 3-5kW generator


Dear sterling allan
We will release everything through our website in the early new year as keshe foundation Italy.
Yours faithfully
M T Keshe

-- SilverThunder 21:23, 20 December 2013 (UTC)

Amphibious vehicle driven by QMoGen?

Permalink
Relevance: Electromagnetic > QMoGen > Directory:Chris Garner's MSV Explorer that runs on Gyro Generator


This article appeared at Keelynet yesterday:

Amphibious vehicle inventor claims is driven by perpetual motion


He came up with the idea for his range of personal marines after a close encounter with a large shark. But now concept designer Chris Garner is also preparing for coming face-to-face with predators on land - with his first attempt at an amphibious craft.
But he claims that is not the remarkable aspect of his new Explorer MSV. Mr Garner claims to have found a solution to the age-old puzzle of perpetual motion and is now poised to go public with his scientific breakthrough.
He believes his new 'Gyro Generator' technology will revolutionise the way in which we travel and enable electric vehicles to run indefinitely with no requirement to stop and recharge at regular intervals.
His company's website describes the current submarine version 'as an electrically powered, dual joystick controlled, dry cockpit surface water craft, meticulously designed and engineered to place two observers within an acrylic cockpit below the surface of the ocean at a constant 1.2m, with a topside principal pilot seat.'
The Discovery Channel Canada recently aired a documentary featuring a tracked, amphibious prototype of the Explorer and is keeping a close eye on recent developments. They are also hoping to return and showcase Garner's latest model using what the inventor prefers to describe as 'self-sustaining energy'.
The Design project for Green Power fro Marine Ships. The principle of the system is the application of the gyroscopic moment produced by the rotation of an electric motor which creates inertia which allows the flywheel to stay horizontal and resist the movement of the ship thus compressing the hydraulic cylinders.
The system offers sufficient reliability for generating electricity for use on north sea supply vessels. The system will be applicable for distributed electric source for small sea going vessels.

-- SilverThunder 19:30, 20 December 2013 (UTC)

NSA must be defunded

Permalink
Relevance: Conspiracy > Big Brother


From: Paul Noel
To: Sterling D. Allan
Sent: Wednesday, December 18, 2013 1:29 PM
Subject: Nobody Should Ever Do This


Well we are always told that telling someone "I told you so" is not nice. I would agree it isn't nice, but it is required in this case. It is mandatory by reality.
I told people that the NSA wasn't working against terrorism
I told people it was stealing intellectual capital
I told people the NSA was manipulating our political system
I told people it was involved in bank fraud and industrial spying.
I told people it was involved in destroying the reputation of persons the state wanted hurt.
Well I just about nailed it! Sorry folks I apologize if you are offended but the issue is really this simple. The NSA is a danger to the security and peace of the world. You cannot tolerate it continuing to exist. It's programs are designed to exercise improper influence over you.
This by the way is why I didn't care one wit about my reputation. I still don't care. My ancestors gave shot and shell in the American Revolution to such people. They would turn over in their grave if I even cared if they murder me. The NSA has to know that we are not afraid.
This is really important people. The NSA will be intimately involved in the elections this cycle. They will stand up and make look great certain persons they want to lose. Then at a stategic moment they will release data (Real or Contrived it doesn't matter) that makes people turn away from them and leaving them with only one candidate to elect. Expect nothing less. They will salt the opposition with data from their secret intercepts to fight just at the right moment.
You have to be smarter than them. You have to know this is coming and you have to prevent yourself and others from reacting to this systematic psychological warfare that is going on against you.
The NSA is completely out of line: It is dangerous to the point of lethal to all of our freedom. It must be defunded. Its director needs to be jailed for FRAUD and for violation of the Anti-Deficiency Act. He should also be tried for War Crimes against the People of the USA specifically for attempting to claim spying supported a War in Syria when all facts did not support it. He tried to cause a war. Mr. Clapper is a criminal against humanity. Adm. Alexander should go to jail for this as well. Actually these two should be remanded to the International War Crimes Tribunal in the Haig.
Make no mistake: Any politician who supports the continued existence of the NSA is either a fool or a criminal. Fools should not get elected and criminals should get long vacations at "Club Fed." Neither of these conditions deserve any respect and both should not get reelected.
Thanks
Paul Noel

-- SilverThunder 23:34, 19 December 2013 (UTC)

New Interactive Exhibition Based on Life, Works of Nikola Tesla

Posted:

-- SilverThunder 13:52, 19 December 2013 (UTC)

Emmett Butler posts photos of 2008 QMoGen

Permalink
Relevance: Electromagnetic > QMoGens > Emmett Butler


Excerpt:

This first photo is of me on my 3 wheeled electric tryke, a battery to dc motor to dc generator, looped, seen by um-teen thousands in the Coralville, Hills, Sharon Center and West Liberty 4th of July parades, and ridden during the spring, summer and fall months here in Iowa City, winter not included as it is bloody cold here in Iowa during the winter! This, the tryke and the stand alone generator, built by my dear friend Rob, whom I dearly love and respect, a machinist and welder, an ultimate perfectionist, who used to challenge me on my designs and concepts, now, not only builds them to my specs, but will add improvements as he thinks will make things work better!
The 2nd set of photos were taken 4th week of Sept.-1st week of October in 2008 of a stand alone battery to dc motor to dc generator looped.

More at Directory:Emmett_L._Butler's_QMoGen#December_18.2C_2013:_2008_Motor_Photos

-- SilverThunder 12:54, 19 December 2013 (UTC)

Brief Q&A with Steorn

Permalink
Relevance: Directory:Steorn_Free_Energy


Here is a brief question and answer session I had with Sean McCarthy via Facebook messenger today, along with a sampling of earlier attempts.


September 10th
A. Hi Sterling - sorry for not getting back to you sooner - will contact you tomorrow
November 11th
Q. hello?
November 12th
A. Hi Sterling - on holiday at the moment, back to work next week and will contact you then

[nothing until...]

December 18th
Q. I sent you an email a few days ago regarding an Accounting statement about Steorn. I'd like your input on it to include in coverage I plan to give on it.
A. Hi Sterling - I don't really have a lot to add to the accounts - the company is in a solid financial position and focused on product introduction - have a great Xmas! Shaun
Q. When do you expect HephaHeat to reach market?
A. First half of next year
Q. Great. How come the €50 Million from the two licensees doesn't seem to show up on the Steorn finance balance sheet in the attachment I sent you?
A. That's the license fees that are paid per year when the products are in the market (in fact it will be more than that) - I.e. We receive royalty fees per unit manufactured under the license agreements

-- SilverThunder 19:45, 18 December 2013 (UTC)

Chemtrails Exposed on Discovery Channel

Permalink
Relevance: Weather Control > Geoengineering > Directory:Chemtrails


Posted 4.5 years ago.

  • Could our government really be spreading toxic chemicals through our air? Believe it or not-it's true, even discovery channel has reported on them. (YouTube; July 4, 2009)

-- SilverThunder 19:06, 18 December 2013 (UTC)

Previous

Free Energy Blog:2013:December:11-17

See also

FREE ENERGY BLOG FOOTER

NEWS FOOTER

NEWS BY TOPIC -->
Active: Best Exotic FE | Cold Fusion | Conspiracy | Electromagnetic OU | Events | Fuel Efficiency | Hydroxy / HHO | QMoGen | Rossi Cold Fusion | Water as Fuel
Trickle: Alchemy | Alternative Fuels | Batteries | Electric Vehicles | Emergency Preparedness | Engines | Fundraisers | Geothermal | Gravity Motors | Grid | Humor | Hydro | Hydrogen | Inteligentry | Keshe | Magnet Motors | Nanotech | Open Source | Plasma | Quantum | Solar | Storage | Tesla | Thermal Electric | Top 100 | Waste to Energy | Water | Wind | Zero Point Energy

- PESWiki main page

Personal tools

Departments
Sponsored Links

Support
Toolbox