PESWiki.com -- Pure Energy Systems Wiki:   Finding and facilitating the best renewable energy technologies.

HOPE for uncertain times . . . There is a brighter energy future.





Directory:Searl Effect Generator (SEG)

From PESWiki

Jump to: navigation, search
<< A Top 100 Energy Technology >>

Top 100


Artist animation illustrating the three rings with rollers.  According to Searl, who built nearly two dozen of these in the 1960's, the electrons flow from the middle to the periphery where they can be picked up either as AC or DC current.  If the load is too great, a superconductive effect kicks in, resulting in an anti-gravitic effect.Image source: The Searl Solution.
Artist animation illustrating the three rings with rollers. According to Searl, who built nearly two dozen of these in the 1960's, the electrons flow from the middle to the periphery where they can be picked up either as AC or DC current. If the load is too great, a superconductive effect kicks in, resulting in an anti-gravitic effect.
Image source: The Searl Solution.
Artist rendering illustrating the stator rings and rollers cross sectional view of the four material layers.  These materials typically consist of a Neodymium, Teflon, permanent magnet, and outer most is the copper layer.  The concentric layers are said to form in effect a 'solid state magnetic diode' that moves electron charges in a coherent unidirectional and radial flow towards the periphery which drive the rollers.Image source: The Searl Solution.
Artist rendering illustrating the stator rings and rollers cross sectional view of the four material layers. These materials typically consist of a Neodymium, Teflon, permanent magnet, and outer most is the copper layer. The concentric layers are said to form in effect a 'solid state magnetic diode' that moves electron charges in a coherent unidirectional and radial flow towards the periphery which drive the rollers.
Image source: The Searl Solution.


See also PowerPedia:John Searl

The Searl Effect Generator developed in the 1960s is allegedly capable of cheaply and safely producing electricity without fuel, pollution, friction, or noise. Anti-gravity effects also involved.

Now a mock-up version has been produced demonstrating some of the core principles.

"I have known John since 1988 and have watched his work closely since that time. In the last 19 years I have had the privilege of meeting a number of those people who worked with him in the 1960's and 1970's, who have all confirmed the facts John explained in the first couple of years of our friendship." -- Dr. Terry Moore (Mar. 10, 2007)


Contents

About

This is a new page!
This is a new technology-related article needing expansion. You can help PESWiki by expanding it and are invited to help us add to its contents.
After logging in, click the "edit" link above. Further information might be found in a section of the talk page. Please remove this message once the page has become more mature and adequately developed.

Official Website



Feature Site

Overview

Interview

  • Vortex Network News Interview - The Searl effect is based on magnetic fields that generates a continual motion of magnetized rollers around magnetized rings (also called plates) producing electric energy and, under certain conditions, an anti-gravity effect that can be used for propulsion. Side-effects include negative ionization of surrounding air and a cooling of temperature around the device when in operation. (Vortex Network; July 19, 2008)

Latest Developments

April 5, 2008

Good news - the magnetizer (500KiloWatt SEG Printer Magnetizer and major electrical bus panel) is almost done, we are just waiting now for the buffer unit. Progress is good, and when this is done we will be able to magetize the plates and roller sets.

December 2007

  • 500KiloWatt SEG Printer Magnetizer system nearing completion. [1]
  • SEG prototype's first Plate completed. [2]
  • Honored with the 2007 Loris Hemlof Prize for Best Free Energy Technology. [3]
  • "This month all of the component materials to complete an SEG Plate have been acquired." [4]
  • "Development and production of the SEG will start first with Thailand." [5]

Apr. 24, 2007

"In the first two videos, John explains how the SEG mock-up 'stacks up' against Newton's Laws of Thermodynamics (note: the displayed mock-up is not generating electricity. It is for demonstration and evaluation purposes only. It consumes a small amount of excitation energy, which will be replaced with rare earth elements in the final SEG."

Apr. 11, 2007

  • Searl Effect project update - Associate, Terry Moore, provides an inside glimpse into the recent progress toward replicating John Searl's generator. "At each step he tells us in advance what the result of various steps will be and he is always correct."

Mar. 26, 2007

Two further videos posted by Dr. Terry Moore.

Upgraded demonstration of the Searl effect. 0 volts to 7.5 volts to 0 volts. 200rpm (double speed). 57sec - (posted 26th march 2007)

Mar. 04, 2007

Two videos posted regarding the PES visit, by Dr. Terry Moore.

Dr. Terry Moore: We had hoped the videos taken by Pure Energy Systems would be placed on their web site. Emails to us doubted they came, so we have only put these up to confirm their visit.

Feb. 17, 2007

Demo video released [6]

1996

Searl Effect Commercialisation project fully planned and under way. [7]

1968

John Searl with his craft overhead in 1968.
John Searl with his craft overhead in 1968.
Three member's of John searl's team of the 1970s building the IGV Demo1 at an outdoors site.
Three member's of John searl's team of the 1970s building the IGV Demo1 at an outdoors site.

According to all accounts, 1968 was the height of Searl's achievements with his levity discs. Its development took place in secret and secluded areas of the countryside with a small team of dedicated supporters. Their efforts resulted in an agile and maneuverable craft that was remotely controlled by a local network of ham radio operators during 1960s and 1970s. However these flights did not go unnoticed, thousands of witnesses reported seeing the "Warminster Thing" that rattled rooftops, dropped pigeons that got caught in its way and traumatized unsuspecting bystanders; John Searl recounts in 2008 that 1978 was the last year of test flights.

Videos

  • Videos posted March 26, 2007 at YouTube by Terry Moore demonstrate "the original 'mock-up', but with aluminium sleeves on the rollers, which increases the electron flow and the magnetic effect, such that with just an exciter voltage of 7.5 volts, we are able to spin the rollers at 200 rpm, without them flying off the ring!"

Patents

post here
(Just click on the "[edit]" button to the top, right of the header for this section. You will need to log in.)

Replications

Searl et al

Searl and his team are presently involved in replicating what Searl had in the 1960s. They have gone as far as replicating the roller-around-the-ring effect, but they have not yet replicated the generation of electricity nor anti-gravity.

Meyers et al

On Feb. 22, 2007, Sterling D. Allan wrote:

I have an associate, Welton Meyers (involved heavily with him during my PerenTech / Mike Brady days that predated PES Network; he was also involved with the PES Network launch; Meyers is the one who first got me heavily interested/involved in alt energy in early 2002), who claims to have been on a team that built a magnet motor which, when it started running lifted off the bench and would have gone through the ceiling had not one of the guys reach up and grabed it by the disconnect lever, bringing it back down to the ground. I can't recall if that motor was a Searl variant. I tried to phone him today to get clarification, but he's away for the day.

Elsewhere, I have written:

It was also during that time (1983) that he [Welton] built a magnetic motor along with Bill Cope and an inventor who said he had been involved with Tesla. The day after they announced that they were ready to open the technology to a public offering, the laboratory was raided, their equipment smashed, and their inventor was threatened at gun point to leave the country, which he did. That inventor had also been involved with John Searl and witnessed his flying saucer technology. (Ref)

Russian Group

Source: http://www.searlsolution.com/evidence2.html

V. V. Roschin; S. M. Godin; Institute for High Temperatures, Russian Academy of Science, Izhorskaya 13/19, Moscow 127412, Russia
Abstract: In the present paper the results of the experimental research of magnetic-gravity effects are presented. Anomalous magnetic and thermal changes within a radius of 15 meters from the researched device were measured as well. PACS: 41.20.-q; 44.60.+k; 76.50.+q

Profiles

Inventor: John Roy Robert Searl

Company

Searl looks forward to the day when he can get back into space work, developing the antigravity effects of the SEG device.

He says that with this technology, a trip to the moon would take an hour. A trip to Mars would take a couple of months. A trip out of the earth's atmosphere would take 20 minutes. "We could run daily trips to the international space station."

In the News

  • Searl on YouTube - The Searl Effect Generator has always been hip. It was the first over-unity device anybody had ever heard of, and it defined the meaning of ‘antigravity’ in the 60’s. It was also too difficult and expensive for anybody to replicate, and faded into obscurity by the 80’s. Meet Terry Moore, spokesman for the team bringing the SEG back from the brink. (American Antigravity; Mar. 20, 2007)
  • Searl Proof of Concept Video Posted - Mock-up completion marks the first time since 1963 that a roller has rotated about a ring continuously. To be followed in a few months by a full 15 kW SEG generator capable of cheaply and safely producing electricity without fuel, pollution, friction, or noise. (PESN; Feb. 21, 2007)

Discussion

Searl Forums

Comments

See Discussion page

Contact

http://www.searlsolution.com/contact.html

General email: ukpolice333@hotmail.com

See also

- Other Directory listingsLatestA-IJ-RS-ZTreeNews
- PESWiki home page

Personal tools
Related




Related