PesWiki.com

Menu

Event:2013:April Archive:Yildiz Magnet Motor Demos

Lasted edited by Andrew Munsey, updated on June 14, 2016 at 9:26 pm.

  • One error has been found on this page. Administrator will correct this soon.
  • This page has been imported from the old peswiki website. This message will be removed once updated.

Archive of April 2013 of the following:

Image:Natural-stadium Yildiz sq 95x95.jpg
Latest / Top 5 Exotic Free Energy Technologies: Directory:Magnet Motors > Directory:Muammer Yildiz Magnet Motor > Event:2013:Yildiz Magnet Motor Demos - A regularly-updated page to provide a chronicle of events pertaining to a public demonstration of Muammer Yildiz' All-Magnet Motor. Present plans are to showcase the motor at the Inventors Expo in Geneva, April 10-14, proving to all the world that all-magnet motors really do work, and offer an affordable, clean energy solution for the planet. (PESWiki 2013)

For the most current info, go to Event:2013:Yildiz Magnet Motor Demos (aka http://YildizDemo.com)

Former (April) Header

This is the header that appeared at YildizDemo.com which forwards to Event:2013:Yildiz Magnet Motor Demos until May 28, 2013, when it had become outdated by a month and a half. (This can be documented by clicking on the "history" tab at the top of that page.)

Relevant Links

(subject to change check back here for updates)

Venue

http://www.inventions-geneva.ch/cgi-bin/gb-exposants.php - Official website for Inventors Expo

PES

There was an error working with the wiki: Code[1] - below

Reports

35+ Reasons Why I Think Yildiz' Magnet Motor Really Works (April 16, 2013)

A Word about the Yildiz Demo Fundraiser and Perceived Letdown (May 4, 2013)

Compilation Video Posted of Running Yildiz Magnet Motor at Inventors Expo, April 10-12, 2013

April 12, 2013

April 11, 2013

April 10, 2013 | Videos

Directory:Muammer Yildiz Magnet Motor - main page here at PESWiki

Classifieds:2013:Yildiz Magnet Motor Demo Needs:

Indiegogo page to support Sterling in Geneva - To document this validation event, speak at press conference, secure an agreement to make the design available through an open license.

Directory:Muammer Yildiz Magnet Motor

Turkish Patent Institute invites Yildiz to Geneva Inventions conference (PESN Feb. 26, 2013)

BSMH-Yildiz' All-Magnet-Motor 30-Day University Test Pending - a leading European university plans to conduct a thorough, academically-rigorous, peer-reviewed, independent, scientific test (PESN January 4, 2013)

Poll: Do you think Yildiz really has achieved an all-magnet motor? See YildizDemo.com

Facebook > PESNetwork

https://twitter.com/PESNetwork

Directory:Muammer Yildiz Magnet Motor (The above "report" links contain many videos from the event)

Documentary Teaser - shows the motor, Mr. Muammer Yildiz, his assistant Halil Turkmen, Assistant Professor Jorge Duarte.

Directory:Muammer Yildiz Magnet Motor

Directory:Muammer Yildiz Magnet Motor

http://www.tpe.gov.tr/ - Turkish Patent Institute

April

Tuesday, April 30, 2013 Travkin on validation and licensing of Yildiz's MM

It is no need to repeat here many of my arguments and facts that have been written in - 02//2013 Are Magnet Motors (MM) Exist? Misunderstanding of the Function, 02//2013 Failure of Perendev and V-gate MM Homogeneous Designs (Homogeneous Models Do not Exist). Then the Scaled Approach, and 02//2013 Magnet Motors of M.Yildiz. Major Design Polyscale Features and Solutions. Why These MM Work? on support of Yildiz magnet motors.

My points were risen from the quite different physical base - from the Hierarchical Scaled Physics (HSP-VAT) that only myself and my associates can go along with.

Universities (in the US and European, Asian) cannot do this - their physics is of Homogeneous one scale (COHP - conventional ortodox homogeneous physics) base.

That means the scientific validation at this moment can be done with COHP, as soon as and if Sterling means of COHP tools only and the measurements (not a theory) with the COHP's measurement methods, procedures and data collected. Keep in mind, that those won't disclose the nature of MM function nevertheless give some business need results.

Anyway, without a prolonged verified test runs I doubt that for the kind of Yildiz MM technologies can be sold a license to interested party(ies).

Thursday, April 26, 2013, 4:45 pm MDT SmartScarecrow Show Synopsis
Image:130425 Wesley 95x95.jpg
Latest: There was an error working with the wiki: Code[1] > This Week in Free Energy™ > Sterling's Weekly Free Energy Review on SmartScarecrow Show: April 25, 2013 - Yildiz Entertaining Manufacturing Licenses, But... • Support Free Energy Mall, Condric Trip, and Translation Service • New Microbatteries the Most Powerful Yet • Sirius Disclosure Premiere • Purviance Pyramid • Zeero Power Looking to Commercialize their Mechanical Advantage Machine • Compilation Video Posted of Running Yildiz Magnet Motor at Expo (FreeEnergyNews)
Thursday, April 25, 2013, 6:40 pm MDT Entertaining Manufacturing Licenses
Image:Hagen-Ruff Chava Yildiz-demo April11 sq 95x95.jpg
Latest / Top 5 Exotic Free Energy Technologies: Directory:Magnet Motors > Directory:Muammer Yildiz Magnet Motor > Event:2013:Yildiz Magnet Motor Demos > Yildiz Entertaining Manufacturing Licenses, But... - Yildiz announced today that he is opening for manufacturing licenses for his all-magnet motor technology. In my opinion this is premature. He needs a business team around him first, to come up with reasonable terms and strategy. Maybe Chava Energy could fill that role? (PESN April 25, 2013)
Wednesday, April 24, 2013, 8:40 am MDT Beware Counterfeits

From: "Halil"

To: "Sterling Allan"

Sent: Wednesday, April 24, 2013 6:29 AM

Subject: There are fakes !

IMPORTANT NOTICE

Dear all,

There are fake web pages and accounts that are using the name of BSMH or

Muammer YILDIZ.

Please pay attention. Muammer YILDIZ has no partners in his business. He

is the unique owner of his products.

Please beware of counterfeits !

BSMH Team

http://www.bsmhturk.com

Sunday, April 21, 2013 Travkin Analysis

http://travkin-hspt.com/fermag/yildiz1fl/yildiz1fl.htm - scroll down to "Aftermath and Conclusions on Demonstration of Magnet Motors of M.Yildiz at 41-st International Exhibition of Inventions in Geneva, Switzerland, 2013, April 10-14"

Saturday, April 20, 2013, 6:30 am MDT March Archived

Event:2013:March Archive:Yildiz Magnet Motor Demos

Saturday, April 20, 2013, 5:45 am MDT Rebuttal for Demo Letdowns

Slightly edited Skype conversation.

: It was just a demo motor. And expo was just a demo area. Not a proper test environment, and not a validation test. The motor worked. Skeptics prefer to stand against always . And this is normal. It's like asking a world tour from Wright brothers with their airplane at the first flight.

: The new prototypes are almost nude (transparent), because they were designed for the 30 day tests.

: After getting the PCT at first, he was planning to open all the parts, during the tests.

: They are much more advanced designs, not 15 years old like that grey one.

: They are so powerful. Not for just a demo.

: I am talking about 508 HP maximum. At an expo hall, it would be so dangerous.

: The place was not a secure area: not for the motors, and not for the audience.

: So, at home, here in Izmir, all will be so much easier.

: He has all the spare parts here. And people are ready to help him 24 hours

: And the security is 24 hours behind him.

: There is always a control. Without the documents of our government, giving us the permission, we couldn't even leave Turkiye.

: It’s so nice to feel that we are protected worldwide. We really appreciate their support.

: As I say always : BSMH is not a personal project. It is global.

: We are not only a few people.

: We are a whole family.

: With all the people.

: The skeptics also are the members of this family.

: Even they don't want to be.

Friday, April 19, 2013, 5:45 pm MDT Running Video Compilation
Image:IMGA0024 Yildiz-at-booth April-12 sq 95x95.jpg
Latest / Top 5 Exotic Free Energy Technologies: Directory:Magnet Motors > Directory:Muammer Yildiz Magnet Motor > Event:2013:Yildiz Magnet Motor Demos > Compilation Video Posted of Running Yildiz Magnet Motor at Inventors Expo, April 10-12, 2013 - 15-minute video compares the first segment where the motor runs continuously at 2600 rpm (for 4.5 hours) with the later segment after the magnet malfunction, so you can hear the sound difference and the noise that exists after the malfunction. Also features start/stop many times disengaging/engaging the brake. (PESN April 19, 2013)

CDpKqdcDDrQ

Friday, April 19, 2013, 10:25 am MDT Sentiments from BSMH

Halil writes:

: "The world is not the same after the expo.

: I reached my goal : To see the smiles on people's faces, having good hopes in their hearts, when they were leaving the expo.

: The world is changed

: In a better way, towards a bright future.

: "And people will be convinced after the validation and the certification tests."

Friday, April 19, 2013, 9:50 am MDT Thanks from BSMH

Halil wrote:

As BSMH team,

We would like to give thanks to:

The Republic of TURKIYE

Republic of TURKIYE, Ministry of Science, Industry and Technology

Turkish Patent Institute

Inventions Geneva

MIXR

PESN

ASIL OLTULU METAL

MEER OBJECT

LEO CARAVAN

For contributing to our participation in the 2013 Geneva Inventions Fair

And everyone who has supported us.

Friday, April 19, 2013, 9:45 am MDT Duarte Presentation 2011

Halil brought this video to my attention, which features Dr. Jorge Duarte giving a presentation about the magnet motor.

z8MJ7IoLqmM

Posted April 27, 2011

Thursday, April 18, 2013, 10:50 pm EST SmartScarecroew Review
Image:SmartScarecrow Sterling-Gary 95x95.jpg
Latest: There was an error working with the wiki: Code[1] > This Week in Free Energy™ > Sterling's Weekly Free Energy Review on SmartScarecrow Show: April 18, 2013 - 35+ Reasons Why I Think Yildiz' Magnet Motor Really Works • Free Energy Demos by Fabrice Andre of Refuge7 in France • A Visit to Fabrice Andre's Pending Kit Production Location Via Vertoele's Facility • Himansh Coming to Europe to Entertain Licensing for Self-Looped Motor-Generator Technology • Cogar International Energy Corporation's Hydro-Electric Reactor • SuperBowl, by YoungTesla (FreeEnergyNews)
Tuesday, April 16, 2013, 2:40 pm EST Why I Think Yildiz Motor is For Real
Image:Yildiz opening booth April-10 sq 95x95.jpg
Latest / Top 5 Exotic Free Energy Technologies: Directory:Magnet Motors > Directory:Muammer Yildiz Magnet Motor > Event:2013:Yildiz Magnet Motor Demos > There was an error working with the wiki: Code[1] - Reasons include: no heat, it runs at ambient temperature • Dr. Jorge Duarte has measured 240 Watts for 5 hours and has seen inside: "no battery" "I know it works" • other professionals impressed • stop/start performance consistent with torque source expected from magnet motor • movement of small motor is consistent with magnet behavior • many evidences of many magnets inside. (PESWiki April 16, 2013)
Monday, April 15, 2013, 5:11 pm GTM Himansh Coming to Geneva

Mentions Yildiz Demo

Image:Himansh in front of self-looped-motor-generator production-facility 95x95.jpg
Latest / Top 5 Exotic Free Energy Technologies: Directory:Electromagnetic > Directory:Motor-Generator Self-Looped with Usable Energy Left Over > Directory:Navrattan Free Power Corporation Ltd. > Himansh Coming to Europe to Entertain Licensing for Self-Looped Motor-Generator Technology - Representing the top technology in our There was an error working with the wiki: Code[1] April 15, 2013)
Sunday, April 14, 2013, 8:50 pm GMT: Why I Visited Fabrice Andre's

I saw a negative comment on one of the videos I posted wondering why I was going to this place in France when the crowdfunding had paid for my trip to cover the Yildiz Motor demo. They thought I should be there the whole time.

Here are my reasons for going to see Fabrice Andre.

The continuous running demo of Yildiz motor was only for 4.5 hours on the first day before the magnet malfunction created an unstable situation, so Yildiz did not want to run it continuously after that.

The key purpose of the webcam was to broadcast the unit running continuously, to increase the number of live witnesses, and to enable people from around the world to participate remotely.

There were no indications that Saturday and Sunday's demonstration was going to be any different than Thursday and Friday's. And indeed, that was the case, other than different people showing up at the booth to talk to them and see the brief demo of it starting and stopping.

We had an opportunity to to visit Fabrice, and I'm very glad we took it.

I dare guess that if I took a poll of our audience as to which they would want me to do: 1) stay at Palexpo, 2) go visit Fabrice I bet 90% would vote for option 2, even before knowing what a fantastic time we would have seeing his technology and then the lab where he will be doing his fabricating of 2 kW kits for sale at which point, I bet the polling would skew closer to 98%, with the exception of the usual trolls.

Sunday, April 14, 2013, ~6:00 pm GMT: Visited Fabrice Andre's Production Facility
Image:Vertoele-outside Ronny-Korsberg sq 95x95.jpg
Latest: OS:Kapagen > Directory:Fabrice Andre > A Visit to Fabrice Andre's Pending Kit Production Location Via Vertoele's Facility - Fabrice said he was planning on producing a kit for around 200 Euros that would generate 2 kilowatts. Today, Ronny and I drove another 100 km to see Vertoele's manufacturing location near Grenoble, France, confirming that Frabrice does appear to have something going on there. (PESN April 14, 2013)

[Composing this on the road back to Geneva]

Ronny and I were not at the Yildiz Demo today. Instead, we went from Fabrice Andre's lodge at Mont Blanc to Fabrice's partner's facility.

Image:Sterling-Allan Mont-Blanc Fabrice-Andre 500.jpg
Image:Sterling-Allan at Fabrice-Andre-loge 500.jpg

He is working with vertical-axis wind turbine manufacturer, Vertoele, to build his kits that he says would cost 200 Euros and produce 2 kW. I'm guessing that if such kits are going to be produced that they will cost a lot more than that. That's only about the price of one or two month's electricity, and the average home usage is easily less than 1.5 kW.

If that price, output, and time frame is even close to being true, it merits verification and support as much as possible.

That would put their technology into #1 position in our Top 5 Exotic Free Energy Technologies listing.

Fabrice said they would be in, even on Sunday, so we drove the 100 kilometers to pay them a visit. We'll be lucky to get back to the Geneva expo before it closes today.

Image:Vertoele facility Orion 500.jpg
Image:Vertoele-outside Ronny-Korsberg 500.jpg

Ronny next to Vertoele logo outside their entrance.

It turns out that they [Vertoele] were not in, but a door was open and in trying to see if anyone was around (since Fabrice had said the would be there) we went in: "Hello? Anyone here?" And we took a few photos and video before seeing a sign by the entrance that said something about no photography. So I'll have to get their permission before posting anything from inside that might be proprietary.

But what I can tell you is the following:

Vertoele does have a manufacturing facility for their vertical axis wind turbines. There were at least four in operation/display outside their facility. And there were maybe a dozen under construction inside the warehouse.

The warehouse is maybe 200 square meters and the office space around the perimiter is maybe 50 square meters.

The warehouse has manufacturing capability, with equipment, supplies, tables, shelving, office space, circuit assembly.

The facility is in an industrial park, part of a building shared with three other companies.

The facility has a substantial security fence and gated entrance, which was open (consistent with Fabrice's saying there would be someone there).

One of Vertoele's solar/wind hybrid units was installed in the front of Fabrice's lodge (I shot a lot of footage and took a few photos standing just a few feet away from it) and the same units were in the warehouse -- at least 2-3 of that same design, and one with the same coloring. Here's a video of it: http://youtu.be/eHfzjmylPOc

Image:Vertoele hybrid at Fabrice-Andre-lodge 500.jpg

There is difinitely a good relationship between Vertoele and Fabrice.

There was a 18" x 4' (" = inch ' = foot) poster of Fabrice's lodge hanging on the wall just inside the entry, along with Vertoele's brochure material, and next to their logo on an office window. There was an even larger (~3' by 10') poster of Fabrice's lodge hanging on another wall.
Image:Fabrice-Andre-lodge poster at Vertoele 500.jpg

We saw at least four prototypes that resembled what we saw in Fabrice' lodge that he is working on, including the bank of lights, the [alleged] self-looped motor-generator (2), and another motor-generator set-up that could have been related as well.

Here's a video of their business card: http://youtu.be/4vrsVj_1wts

Here's a video of the Vertoele hybrid solar/wind unit on Fabrice's lodge: http://youtu.be/CqN3pmiMpvw

We didn't see anything that looked like a "kit" of Fabrice's design being manufactured or prepared. But I wasn't really expecting that, since Fabrice said that they expected to go into production in 2 months from now. Any preparatory work would not likely be on a workbench in a way that we could tell what it is.

So, I would say in conclusion that our visit to the Vertoele facility corroborated what Fabrice told us regarding their plans to procude a kit for his device. As to how far along they actually are, and how intently they are pursuing it, and how rapidly they will be able to manufacture kits, getting that information will have to wait until we are able to interview them.

Saturday, April 13, 10:20 pm GMT: Visit to Refuge7

Latest: OS:Kapagen > Directory:Fabrice Andre > Free Energy Demos by Fabrice Andre of Refuge7 in France - While here in the area, Ronny and I visited the famous inventor living off-grid high in the Alps. Does he have a new #1 technology? Videos of pancake coil pick-up effect, a "cold fusion" flask with a plasma ark, Tesla pancake coil, Kapagen coil array, self-looped motor generator system. (PESN April 13, 2013)

Thanks to the suggestion and orchestration of Darren Walker, Ronny and I have had quite the day visiting Fabrice Andre's off-grid Refuge7 Lodge in France. In additional to conventional solar and wind modalities, he is working on a number of exotic free energy technologies, including a Kapanadze variant kit that he says may be available in a couple of months for 200 Euros, which will produce 2 kW of power.

If that is true, this will put them in #1 position in our Top 5 Exotic Free Energy Technologies listing, both for its nearness to market, and for its potential to make large impact with its low price. The "kit" approach may help circumvent some otherwise onerous certification steps that are required for commercial products.

When I saw the photos of Refuge7 on their website, I pictured it being at the base of Mount Blonc. However, in order to get there, we drove to an airport at a ski resort where he met us in a snow cat to drive us the remaining 2.5 kilometers up to the 2,000 meter elevation pass where his resort is located. A couple that came in after us walked in. It took them 2 hours. I was very wet from the wet snow being kicked up by the tracks of his snowcat, but was more than happy for the experience to be going up so high in an absolutely gorgeous setting in France.

His demonstrations included the following:

A pancake coil pick-up effect in which 500 W input lights up a bank of 6 500-W bulbs (maybe at 10-20% power), and they pulsate in and out in intensity, even though he is not changing the value of the input. And as he dropped the input down, the bulbs stayed at their same intensity, still pulsating.

A "cold fusion" flask with a plasma ark and huge volume of bubbles. The input/output on that were not measured. I'm guessing it probably is not demonstrating overunity, but it is interesting science.

A tesla pancake coil, longitudinal transmission set-up.

A Kapagen coil array, explaining how it works.

A self-looped motor generator system (didn't get a full explanation).

Here's an intro video:

tuRbZeUhrIs

I shot about 1.5 hours of video that I'll be uploading, but most of that will be coming later because the internet connection here (satellite?) is quite slow.

It turns out that today is Ronny's birthday, and he couldn't think of a better way to celebrate his birthday. I shot a "happy birthday" video with him, which I think you all would enjoy. Don't get too jealous.

(Ronny was one of several people who has been heavily involved in helping organize the Yildiz demo. He rented a motor home so we could stay next to Yildiz' motor home. [They were going to stay at a campground.] His foresight has enabled us to stay nearby. Not only has this option been much cheaper than a hotel, but today, we were about to drive our hotel room up the mountain. [Don't worry, the temperatures are not expected to drop below zero tonight, so the motor home doesn't have to be "winterized".])

NnaTIZXZAV8

Later this evening, I received a Skype call from Mr. Directory:TurXotor and TurXator by the Alperen Group of Turkey. I've not heard from him for years. The last story I did on him was on November 30, 2010, my birthday and I wrote a "happy birthday to me" story noting his technology in it. I'm hoping to get an update from him when I get back to the states. He said he has some major announcements. Maybe his technology will be bumped into the Top 5 too.

Besides the birthday coincidence, the Turkey synchronicity is curious as well, since Mr. Yildiz is from Turkey.

Speaking of Mr. Yildiz and the Top 5, his weight there is diminishing for the following reasons:

He's not as close as I had thought to being ready for production.

It is difficult to work with him and this is one of the primary reasons he still is not in the market though he's had this technology developed well enough to bring in funding for at least 15 years. There is some good talent coming forward to help him now, which will take the edge off of this weakness but it is still a significant drawback.

The motor will not be easy to replicate. Too many magnets, too easy to not get them just right.

Though it could be good for an open license, the difficulty of replicating will make it less easy to have it go viral.

I'm going to be working on a list of reasons why I think his motor is legitimate. However, it takes a lot more than just a working technology for the technology to be successful in going to market.

Saturday, April 13, 9:30 am GMT: Going to Kapagen

Ronny and I are going to visit the Kapagen villa in France, so I will not be broadcasting from the Expo today.

Halil, Yildiz and Muran just left for Palexpo.

Saturday, April 13, 12:40 am GMT: Review of April 12

Latest / Top 5 Exotic Free Energy Technologies: Directory:Magnet Motors > Directory:Muammer Yildiz Magnet Motor > Event:2013:Yildiz Magnet Motor Demos > Yildiz Magnet Motor Demo Report, April 12, 2013 - Highlights from he third day at the Inventors Conference in Geneva, include: magnetic field readings by several methods, interview w/ Duarte, how the motor equilibrates, motor start-stop several times, a 10 kW self-looped motor-generator, awards ceremony. (PESN April 12, 2013)

Saturday, April 13, 12:40 am GMT: Yildiz Booth on Turkish TV

http://www.odatv.com/vid_video.php?id=8BAH4

By these major media companies in Turkey:

Cihan Haber AJansi

Dogon Haber AJansi

Anadolu AJansi

Friday, April 12, 6:25 pm GMT: Turned Audio Off from Webcam

I was talked into turning the audio off from the webcam.

Even though this is a public event, with cameras coming and going, when people are talking one on one, even with other people around, they sometimes feel like they can say more private things and they don't realize there is a webcam nearby picking up what they are saying for a more public audience.

Sometimes business discussions and strategies are being discussed that would not be discussed in the way they are if they knew people could hear their discussion. The audience has no name or face to them.

Friday, April 12, 5:45 pm GMT: Himansh Not Coming Sunday

Directory:Motor-Generator Self-Looped with Usable Energy Left Over was not able to get his passport in time to come for Sunday. He won't have it until Monday, so he could be here Tuesday, if Mr. Yildiz is still here. We don't yet know the plans of Mr. Yildiz, so that is an unknown. Won't know until Sunday some time.

Today has been much like yesterday.

Friday April 12, 9:45 am GMT: Today Likely Repeat of Yesterday

A couple of other interesting effects measured/observed.

A friend of mine, Paolo Mazzorana, and his associate came with a phone app that measures magnetic field in micro-Tesla. The ambient reading around the hall is between 35 and 55 uT. But as the phone approaches the small motor, you see the reading go up, starting about 15 feet away. By the time the phone is about 2 feet away, the phone app gives a "STOP" warning, as the reading approaches 200 uT. Ironically, the reading is not as high approaching the larger motor when it is not spinning. The small motor maxes the meter at 2 feet, while the larger motor maxes the app at 1/2 feet. I shot a video of them taking these measurements.

They said that on Wednesday, when the larger motor was running at 2600 rpm that the magnetic field strength actually measured LOWER as they approached it, going down to about 25 uT.

The other effect is that a magnetic field detector sheet (greenish plastic appearance) is set on the side of the motor as it is spinning slowly, and you can see the shape change as the magnets pass by.

Friday April 12, 8:30 am GMT: Today Likely Repeat of Yesterday

An update from Halil. It wasn't the larger motor they were working on. It was the smaller one. They were hoping to get it ready to run today, but they ran out of time. Maybe tomorrow it will be ready, but hopefully at least by Sunday.

I went just now to try out the movement of the smaller motor, and to my touch, it feels like the cogging is more severe. It's harder to push past the cogging point. The pressure required to push it is enough to cut your finger if you did it wrong. But once the 360 rotation begins, it rotates a few times before bouncing back and forth maybe 270 degrees, about three times, before coming to a stop, with a very tight cogging.

Friday April 12, 8:30 am GMT: Worked on Motor Through Night

Halil said that Yildiz, he and Muran (sp?) stayed up until 4 am working on the motor, taking it apart, putting it back together.

: "Over 1000 parts..."

They are still in their motor home working on it.

p.s. Regarding the 5 kW motor that is scheduled to be independently validated in the end of May...

It has a central shaft of maybe 10 cm in diameter that rotates. And it has 6 other shafts of about the same diameter equally spaced around the central shaft. Each of these is fitted with magnets in such a way that as they are turned one way or the other they increase or decrease the torque of the device, making it governable.

They were going to bring that unit to this expo, but Mr. Yildiz decided at the last minute to not bring it. "It is too transparent."

Friday April 12, 1:30 am GMT: Periodic Demos

Latest / Top 5 Exotic Free Energy Technologies: Directory:Magnet Motors > Directory:Muammer Yildiz Magnet Motor > Event:2013:Yildiz Magnet Motor Demos > Yildiz Magnet Motor Demo Report, April 11, 2013 - Even though the motor was not continuously running, only occasionally for a brief demo, the energy of the people visiting the booth at the Inventors Expo in Geneva was still very high and there were things observable today that were not noticed or addressed yesterday. The believers have more reason to believe. (PESN April 11, 2013)

Thursday April 11, 11:40 am GMT: Waiting for Silicon to Dry

Yildiz made some repairs last night. Waiting for the silicon (adhesive) to dry. But even then, because some of the magnet fragments from yesterday's failure are loose in the device, Yildiz doesn't want to risk cascading failure, so he is not likely to try for a continuous run, though he will be turning it on and off for special visitors.

It would take him a day and a half to take the motor apart, clean up the fragments, and reassemble the motor

They are also hoping to do a demo of the smaller motor, but it doesn't have a controller on it, so it has to be stopped by grabbing the shaft with a glove (or taking it apart [which isn't an option in an open setting like this]).

Thursday, April 11, 2013 12:20 am GMT: Videos Posting

Latest / Top 5 Exotic Free Energy Technologies: Directory:Magnet Motors > Directory:Muammer Yildiz Magnet Motor > Event:2013:Yildiz Magnet Motor Demos > Report on the Yildiz Magnet Motor Demo in Geneva, April 10, 2013 - The motor ran for 4.5 hours at ~2600 rpm before malfunctioning. Plan to repair it this evening to resume demo tomorrow. Duarte said he saw inside the motor and can vouch that there are no batteries inside. Technical problems with internet being resolved. (PESN April 10, 2013)

Wednesday, April 10, 2013 10:30 pm GMT: PESWiki up again

PESWiki was down for a long time today. So I posted a report of the day's demo at PESN

Latest / Top 5 Exotic Free Energy Technologies: Directory:Magnet Motors > Directory:Muammer Yildiz Magnet Motor > Event:2013:Yildiz Magnet Motor Demos > Report on the Yildiz Magnet Motor Demo in Geneva, April 10, 2013 - The motor ran for 4.5 hours at ~2600 rpm before malfunctioning. Plan to repair it this evening to resume demo tomorrow. Duarte said he saw inside the motor and can vouch that there are no batteries inside. Technical problems with internet being resolved. (PESN April 10, 2013)

We've had all kinds of technical difficulties today. The internet at Palexpo is attrocious. We'll have a much better connection tomorrow but had to fork out $432 for it. Please head over to http://freeenergynews.com/donations if you would like to help us cover that.

I've been uploading a bunch of videos I shot to http://www.youtube.com/user/PESNetwork There are a lot of excerpts that show evidence that the motor is based on magnets.

I also created a temporary page at PESN while PESWiki was down.

Wednesday, April 10, 2013 11:15 am GMT: First Demo Report

At around 10:05 am GMT, Mr. Yildiz attempted to start the motor, but something was not working, so he took it over to a closet where he could have privacy, then emerged with the motor and started it.

The motor started at 10:28 am.

At the setting it is at now, the rotation speed is continually increasing, starting at 2601 rpm, then by 11 am it was 2663 rpm.

The motor is situated behind a clear cover in front of the fan blade. We haven't taken temperature readings yet.

The bandwidth here at Palexpo is not good enough for streaming. Regular web pages load slowly. My email still hasn't downloaded after half an hour.

I'm going to go see if I can do something about the bandwidth. Earlier, she warned me that the connection was slow, and said that I'd have to take what I get. Had we arranged before hand for internet, we could have had a cat5 cable brought to the booth. But now that the carpets are laid, it is too late. Maybe tomorrow?

Tuesday, April 9, 2013 9:30 pm GMT: Moved Broadcast Feed

Moved feed back to http://justin.tv/pesnetwork/

couldn't get http://www.ustream.tv/channel/pesnetwork to work

Sitting down to dinner.

Tuesday, April 9, 2013 4:45 pm GMT: Moved Broadcast Feed

Moved my live broadcast camera to http://www.ustream.tv/channel/pesnetwork because JustinTV's "see also" content below the feed is pornish. UStream is more professional. Also removed Webcammax to prevent conflicts between Skype and the broadcast feed. Ronny Korsberg will also be moving his feed to ustream.

Tuesday, April 9, 2013 11:30 pm GMT: Report

20130409 Sterling Allan reports from Yildiz demo

TBjeOvZAqKg

Tuesday, April 9, 2013 3:15 pm GMT: Lunch

We went to Palexpo to get oriented with booth.

Tried to find a mall in Geneva, drove around for a while, came back to villa in France for lunch, then we'll head back out to pick up supplies, etc.

Will not be setting up motor today. It's ready to go.

Tuesday, April 9, 2013 1:30 pm GMT: Ronny's Feed

Added link to Ronny's live feed.

http://justin.tv/korsberg_energy

Tuesday, April 9, 2013 10:30 am GMT: Upcoming Schedule

"Schedule" - Feature added to this page, top right, under main photo.

Nothing extraordinary this morning, other than filming the [spying?] apparatus some apparent "maintenance workers" attached to the telephone pole yesterday, in view of Rene and Arno. Posting pending probably later today or tomorrow.

Tuesday, April 9, 2013 3:10 am GMT: Hendershot Interview

I got up a 2 am GMT to do an interview with Gary Hendershot as part of his weekly "Alternative Energy Hour" segment on the Rense Network.

The interview will be uploaded soon to his channel at http://www.youtube.com/user/SmartScarecrow?feature=watch

The whole show was about this demo, what I've experience so far in Geneva in meeing Mr. Yildiz and the crew here, and what we expect to happen at the Expo.

I'm going back to bed.

Just kidding, first I had to get this bullet up for the April 8 news story:

Image:130408 Yildiz-Motors trunk sq 95x95.jpg
Latest / Top 5 Exotic Free Energy Technologies: Directory:Magnet Motors > Directory:Muammer Yildiz Magnet Motor > Event:2013:Yildiz Magnet Motor Demos > Event:2013:Yildiz Magnet Motor Demos - Wish you were here. Highlights from April 8: Posted a couple of videos, photos, descriptions, draft copy of online witness log form ran live feed for several hours as a test run to work out bugs. Spent several hours w/ Yildiz and a crew of about seven others, including two from documentary film being made. (PESWiki April 8, 2013)
Monday, April 8, 2013 11:45 pm GMT: Photos

The motor is smaller than I expected it to be.

Image:130408 Yildiz-Motors trunk 600.jpg

Here I am with Mr. Yildiz.

Image:IMGA0015 500.jpg

Rene and his cameraman are documenting the event.

Image:IMGA0042 500.jpg

Here's the backdrop that Rene brought.

Image:IMGA0045 500.jpg
Monday, April 8, 2013 8:30 pm GMT: Live: (mic check) Evening Chat w/ Yildiz

Re: http://justin.tv/pesnetwork

Being piped and tweaked through http://SmartScarecrow.com/live/

In doing the test run just now, we see several problems. The mic I'm using is designed for headset, not picking up sounds in a room. So I need to get at "shotgun mic" so you can tell what people are saying.

Thanks to Gary Hendershot for his coaching to get the mic working in the first place.

(We're watching a TED talk about the problems with scientific thinking today. The talk was removed from TED Talks, but put back up in a remote section of site due to protests about its removal.)

Monday, April 8, 2013 7:00 pm GMT: Live: Dinner w/ Yildiz

Now live: http://justin.tv/pesnetwork

Monday, April 8, 2013 4:05 pm GMT: Witness Sign-up Draft Page

On the flight over, I worked on a sign-up page for people witnessing the demo online.

http://www.pureenergysystems.com/forms/Yildiz-Geneva-Demo-Witness/

Let me know if you have suggestions for it:

Missing Questions

Editing

Rewording

Sequence

Things that don't work

-- Sterling

Monday, April 8, 2013 4:00 pm GMT: Dinner with Yildiz

On my way to have dinner with Halil and Mr. Yildiz.

Monday, April 8, 2013 3:50 pm GMT: Starling Hotel in Geneva

I made it to Geneva, and shot this video (nearly done uploading) as I exited the airport (walking) to Palexpo, so show how close it is to the airport, and how well-situated the Starling Hotel is and how it would be a great venue for the night-time demonstration of Yildiz all-magnet motor, which will be demonstrated during the day on April 10-14 at the Inventors Expo at Palexpo.

O71Je0apstg

Sunday, April 7, 2013 2:00 pm: Sterling Support

I'm sitting here at Dulles in D.C. waiting for the flight to Geneva.

Image:Support-Sterling-in-Geneva sq 95x95.jpg
Latest / Top 5 Exotic Free Energy Technologies: Directory:Magnet Motors > Directory:Muammer Yildiz Magnet Motor > Event:2013:Yildiz Magnet Motor Demos > Directory:Fundraisers > Support Sterling at the Yildiz All-Magnet Motor Demo at the Inventors Expo - Need to keep the kitty happy while at the Geneva event, April 10-14. Running short. Thanks for all your encouragement to keep up this quest for open licensing of exotic free energy technologies. (Indiegogo April 7, 2013)
Saturday, April 6, 2013 6:15 am: Palexpo Next to Airport

Take a look at this map. I've never seen anything like this before. When they say the expo center is "near" the airport, we're talking meters, not kilometers. You could almost reach out the window on the north side and touch the tarmac. And France is on the other side of the runway, less than kilometer a mile away. It looks like there is even a walkway directly from the airport to Palexpo. No wheeled transportation required.

The major arterial freeway actually passes over or under Palexpo.

Note the location of the Starling hotel (where we would love to be able to go for the demos, instead of the campground), just north of Palexpo.

Image:Palexpo map 600.gif

That makes it very convenient if you are just flying in for a day.

If you want to join us at the campground for the nighttime portion of the demo, it's a 9.5 km drive, about 2.5 of which are backtracking due to the road layout. Coming back is a straight shot of 6.9 km.

Image:Campground-Palexpo-map 600.gif
Friday, April 5, 2013 4:10 pm: Campground at Night
Image:Logofecc4.asp 95x95.jpg
Latest / Top 5 Exotic Free Energy Technologies: Directory:Magnet Motors > Directory:Muammer Yildiz Magnet Motor > Event:2013:Yildiz Magnet Motor Demos > - Mr. Yildiz wants the primary demo motor to run continuously for the entire 5-day expo. So what we will be doing when the Expo closes down each night is to move the motors to another location [campground] (watching them carefully during transport to assure that nothing has been modified, added, charged, etc). (News:Pure Energy Blog April 5, 2013)
Friday, April 5, 2013 9:00 am: This Week in Free Energy
Image:130405 Tommey-Reed sq 95x95.jpg
Latest: There was an error working with the wiki: Code[1] > This Week in Free Energy™ > Sterling's Weekly Free Energy Review on SmartScarecrow Show: April 4, 2013 - Defkalion lying low, preparing for some big splashes • First Fundraising Goal Met: Sterling Going to Geneva Next Goal: Test Apparatus • Brainstorm: Publish Yildiz Test Propeller Specs • Eric Dollard Inspired by Crowdfunding Outpouring • Bladeless Windmill from Delft • GE awards leading innovators in clean energy technology (FreeEnergyNews)
Thursday, April 4, 2013 7:45 am: New Blog Bullet

I've revised this present page to reflect the modifications to the demo terms, with the emphasis being on the demo in Geneva, with follow-up at a university.

Image:Natural-stadium Yildiz sq 95x95.jpg
Latest / Top 5 Exotic Free Energy Technologies: Directory:Magnet Motors > Directory:Muammer Yildiz Magnet Motor > Event:2013:Yildiz Magnet Motor Demos - A regularly-updated page to provide a chronicle of events pertaining to a public demonstration of Muammer Yildiz' All-Magnet Motor. Present plans are to showcase the motor at the Inventors Expo in Geneva, April 10-14, proving to all the world that all-magnet motors really do work, and offer an affordable, clean energy solution for the planet. (PESWiki 2013)
Friday, April 1, 2013: Overview by Sterling

I was on Gary Hendershot's Alternative Energy Hour, which is part of the Rense Network, on April 1, providing an overview of the demonstration of Mr. Yildiz' motor at the Geneva Inventors Expo. Here's the video of that show, with advertisement time removed.

6GbDsznTBTs

March, 2013

Event:2013:March Archive:Yildiz Magnet Motor Demos - going backward in time

February, 2013

Event:2013:February Archive:Validating Muammer Yildiz' Magnet Motor for 30 Days at European University - going backward in time

January, 2013

Event:2013:January Archive:Validating Muammer Yildiz' Magnet Motor for 30 Days at European University - going backward in time

See also

YILDIZ MAGNET MOTOR FOOTER

Directory:Muammer Yildiz Magnet Motor

Article: 35+ Reasons Why I Think Yildiz' Magnet Motor Really Works

Event:2013:Yildiz Magnet Motor Demos (aka http://YildizDemo.com)

Event:2013:January Archive:Validating Muammer Yildiz' Magnet Motor for 30 Days at European University | Event:2013:February Archive:Validating Muammer Yildiz' Magnet Motor for 30 Days at European University | Event:2013:March Archive:Yildiz Magnet Motor Demos | Event:2013:April Archive:Yildiz Magnet Motor Demos 2013

MAGNET MOTORS FOOTER

Directory:Magnet Motors

News:Magnet Motors

Directory:All-Magnet Motors:Theory

PowerPedia:Magnetic motor - encyclopedic entry

Directory:Linear Magnet Accelerators

Directory:Magnetism

Directory:Magnets

Directory:Magnets:Ceramic

LEADING (including legendary status)

Directory:Muammer Yildiz Magnet Motor

Directory:Michael MacInnes' Magnet Motor

Directory:Torian Magnet Motor

Directory:Magnetic Motors:Howard Johnson

OS:Magnetic Motors:HJ

PowerPedia:Howard Johnson

Directory:Steorn Free Energy

Directory:Shinyeon Energy Research Center

Directory:Cycclone

Directory:Disturbed Self-Compensating Symmetry (Terawatt Research)

Directory: Mechanical Opener for V-Gate Magnet Motor

There was an error working with the wiki: Code[1]

MAGNET MOTORS FOOTER

Directory:Magnet Motors

News:Magnet Motors

Directory:All-Magnet Motors:Theory

PowerPedia:Magnetic motor - encyclopedic entry

Directory:Linear Magnet Accelerators

Directory:Magnetism

Directory:Magnets

Directory:Magnets:Ceramic

LEADING (including legendary status)

Directory:Muammer Yildiz Magnet Motor

Directory:Michael MacInnes' Magnet Motor

Directory:Torian Magnet Motor

Directory:Magnetic Motors:Howard Johnson

OS:Magnetic Motors:HJ

PowerPedia:Howard Johnson

Directory:Steorn Free Energy

Directory:Shinyeon Energy Research Center

Directory:Cycclone

Directory:Disturbed Self-Compensating Symmetry (Terawatt Research)

Directory: Mechanical Opener for V-Gate Magnet Motor

There was an error working with the wiki: Code[1]

EVENTS FOOTER

- Current events - upcoming / ongoing

- News:Events - events as we cover them in our news

- There was an error working with the wiki: Code[1] | Events:Archive:2003 | Events:Archive:2004 | Events:Archive:2005 | Events:Archive:2006 | Events:Archive:2007 | Events:Archive:2008 | Events:Archive:2009 | Events:Archive:2010 | Events:Archive:2011 | Events:Archive:2012 | Events:Archive:2013

- Directory:Annual Free Energy Conferences

- News - Free Energy News

- Main Page

There was an error working with the wiki: Code[2]

There was an error working with the wiki: Code[3]

Comments