Directory:WARP ENECO

Lasted edited by Andrew Munsey, updated on June 14, 2016 at 8:54 pm.

  • 2 errors has been found on this page. Administrator will correct this soon.
  • This page has been imported from the old peswiki website. This message will be removed once updated.

&lt&lt A Congress:Top 100 Technologies -- RD Energy Technology &gt&gt

There was an error working with the wiki: Code[1]

There was an error working with the wiki: Code[2]

Image:WARPEneco300x300 byKevn.jpg

Wind Amplified Rotor Platform (WARP)

The WARP wind amplifier module design, by ENECO Texas, LLC, speeds up the wind with a velocity amplification factor (VAF) in excess of 1.5 over free wind. This amplification factor means that an increase of 65% in wind speed would result in a 4.5-fold increase in power due to the fact that power increases as a cubed function of wind speed increase. 1.65 x 1.65 x 1.65 = 4.49

The aerodynamically-designed, repeating hourglass shape essentially focuses the wind energy onto smaller turbines. This makes wind generation more modular and hence more affordable, increasing ease of maintenance, and decreasing downtime. A WARP wind farm would need on average about 80% less land per kilowatt of energy generated. Visually, the WARP design is more appealing and blends into building designs better than the traditional horizontal axis, large, three-blade turbines.

Projected cost: $.02 to $.04/kW-h or lower.

Prototypes have been built and installed in Belgium and France.

The company business model is to license out the concept for others to implement in desired territories (can include countries, states/provinces, etc.) and in desired application markets (wind farms -either onshore &/or offshore, architectural buildings, telecom towers, electric utility transmission towers, etc.).

The design can also be applied to water flow.


This PESWiki page was commenced Sept. 9, 2008 by Congress:Member:Robert L. Pritchett.

Official Websites

Slide Show




About WARP


SUBURBAN WIND POWER (4-page PDF) Renewable energy and distributed generation


10 MW & Up Unit WARP™ Wind Power Systems - A Practical & Economic Approach (16-Page PDF 816KB) by Alfred L. Weisbrich


Image:WARP Yaw Module 95x95.jpg

Download (13 Mb mp3) - On Sept. 22, 2008, Congress:Founder:Sterling D. Allan conducted a live, 1-hour interview with Alfred and Gunther Weisbrich, founder and inventor, and business partner, respectively, as part of the Free Energy Now radio series.

How it Works

Image:WARP-ENECO 350.jpg

Slide Show

"The aerodynamically designed toroidal-shaped amplifier modules are vertically integrated on a core tower, in building block fashion, allowing the system to be packaged to any power size from utility to commercial or village power scale. For large capacity systems, each module has two rotors, typically 2-3 metres in diameter. WARP's panelized design also lends itself to the piggybacking of photovoltaic cells on its structure, thus making it possible to add 10% more power through the use of WARP as a combined wind/PV power system.

Image:WARP Synergestic Flow 200.jpg

The WARP™ design is comprised of a stacked array of wind amplifier modules that can employ relatively small (typically 6 ft or 10 ft) diameter rotors. The design has each rotor direct drive a generator, thereby eliminating the need for step-up gearboxes. These same modules are capable of amplifying the ambient wind speed by up to 1.8 times free stream values (e.g., 10 mph ambient speed become 18 mph wind speed at the rotor disks).

The process (which is based on the Bernoulli Principal) is similar to nature's highly sought saddle ridges for wind turbines. The only difference with the WARP™ design is that the wind can be accepted and channeled from any direction.

The multiplicity of two opposite turbines at any WARP™ rotor level (~180 degrees apart about the tower) may continuously and passively orient themselves perpendicular to the ever changing wind direction. The modules are attached to a core (e.g. lattice or tube tower) support structure that can also be built to virtually any existing tower height.

This unique design can also be integrated to many different kinds of structures-e.g., telecom towers, buildings, offshore platforms, as well as utility scale transmission towers."


Projected COE is in the $.02 to $.04/kWh range.


WARP's higher energy capture capability, and small unit spacing because of shortened perturbation from its smaller rotors, a WARP wind farm would need on average over 80% less land per kilowatt of energy generated and also be able to use much taller structures than possible with conventional systems. Some other features mentioned by Mr. Weisbrich were WARP'S lower noise, no electromagnetic interference, absence of gear boxes enhancing reliability and the avoidance of pollution from hydraulic and transmission fluid leakage, substantial fuel savings when integrated with fossil fuel plants in a stand-alone system, and less danger to birds.


Wind Turbine Towers

Tops of buildings

Water Flow Energy Harvesting

Independent Testing

A $1.5 million expenditure on research and development through Rensselaer Polytechnic Institute (RPI), under New York State Energy Research (NYSERDA) support, as well as with prospective licensees testing WARP for various fields of use, has resulted in a convincing data base for the WARP technology. In addition, independently sponsored research has been conducted overseas, including computational fluid dynamic (CFD) analyses at the Technical University, Graz, Austria, and, recently, wind tunnel tests in Denmark. The results corroborated those generated by Rensselaer's scale model wind tunnel tests. With reference to the Graz CFD tests, it was also noted that tallstacked arrays of WARP modules would produce a VAF of 1.7 to 1.8 on average of the free stream wind speed, resulting in a relative maximum power of approximately 5 times that of the free air turbine.

A pre-prototype test of a WARP unit yielded significant data but unfortunately the results were limited because of a force majeure 100 year storm. On the positive side, although the storm destroyed all the costly and complex customized test instrumentation, including the on-board computer data acquisition equipment, it did not significantly damage WARP's modules and turbines. Depending upon site wind and module height, each WARP rotor is capable of, generating lOkW to 50kW by small, conventional high efficiency horizontal axis wind turbines at rated wind speed. WARP's modular system makes it is possible to tailor its power capacity from kilowatt levels to multi-megawatt levels without the need for costly rotor redesign and retooling. Plus, with the coincidence of optimum rotor rpm matching generator speed, the need for gearboxes in the WARP system is also eliminated.


Wind amplified rotor platform (warp) Patent number: 5520505

:Abstract: An energy conversion device which comprises a stacked array of alternating yawable and fixed toroidal modules about a central core structure. The yawable toroids have typically four impact impellers mounted in their peripheral flow regions for the purpose of capturing flow energy. The fixed toroids are mounted to complement and further enhance fluid flow impact impeller energy capture and to provide housing means for a variety of matter both associated and unassociated with the energy system. The stacked array of a toroid with impellers, designated a Toroidal Rotor Amplifier Platform (TRAP.TM.), and a toroid without impellers, designated a Toroidal Wind Frame (TWF.TM.), is referred to in aggregate, when used for wind energy conversion, as a Wind Amplified Rotor Platforms (WARP.TM.) system. Under wind energy conversion use, a WARP.TM. system may be used also to both generate electric power and serve as a power line transmission support tower, and/or as a telecommunications or...


Related Technologies

Image:Majid rashidi 95x95.jpg

Helical Towers Could Bring Wind Turbines to Cities - Dr. Majid Rashidi devised an innovative new Wind Tower Model, utilizing a silo shaped wind deflector that can be mounted atop a typical city edifice. (Good Clean Tech Nov. 25, 2008)

Circumvention Attempt : "We are very familiar with this design. It actually is a result of this group attempting to circumvent our WARP Patent. We had been 'engaged' by them for a long period of time -- but when they could not pay for the WARP license rights they thought it easier to 'screw' the design -- which has obvious aerodynamic and performance flaws associated with it." (Gunther Weisbrich Dec. 26, 2008)


Company: ENECO Texas, LLC

ENECO is a specialized technology R&D, engineering consulting, and intellectual property marketing firm dedicated to promoting and assisting commercial development through patent licensing of its breakthrough modular and multi-tasking Wind Amplified Rotor Platform (WARP) renewable -wind/PV solar- power technology. This widely internationally patented technology has gained world-wide recognition and forms the basis for the next generation of environmentally complying electric wind/solar power generation plants, both small and large. Over $1,500,000 in research and development has been conducted in connection with Rensselaer Polytechnic Institute and support in part from the New York State Energy Research & Development Authorit (NYSERDA) .


Inventor: Alfred L. Weisbrich


In the News

Image:WARPEneco95x95 byKevn.jpg

There was an error working with the wiki: Code[1] - One-hour interview regarding the WARP design that speeds up the wind with a velocity amplification factor in excess of 1.5 over free wind, resulting in a 4.5-fold increase in power, while not being nearly so visually obtrusive, and having much lower vibration and noise, making it suitable for topping buildings. Projected energy generation cost: $.02 to $.04/kW-h or lower. (FreeEnergyNow Sept. 22, 2008)

Potential solution for electric transmission constraints - ENECO Texas LLC offers a unique and promising solution for the transmission industry with its internationally patented WARP™ (Wind Amplified Rotor Platform) wind energy technology available under patent license. (Utility Automation March 1, 2004)

Other Coverage - Index of Key Technical Publications

Google > WARP ENECO - 1,390 results as of Sept. 11, 2008

Eneco Texas LLC (eco-web) - West Simsbury, United StatesWebsite, Profile, Wind Amplified Rotor Platforms (WARP), Advanced Windpower System Design and Patent Licensing, Engineering Consulting ...


Image:Warpeneco thumbnail 300.jpg
Display File Source

The Wind Amplified Rotor Platform" was exhibited at the Congress:Top 100 Clean Energy Technologies Exhibited at the Chicago Hall of Fame, 2008


See Talk:Directory:WARP ENECO

Not to Be Confused With . . .

Image:ENECO thermal electric cooling collage 95x95.jpg

Directory:Eneco power chip - Utah company claims to have invented and patented a "solid state energy conversion/generation chip" that will convert heat directly into electricity or alternatively refrigerate down to -200 degrees Celsius when electricity is applied.


Alfred L. Weisbrich, PE

CEO & Founder


West Simsbury, CT, USA

Tel/fax/vm: 1 860 651 0061

Skype: alfred.l.weisbrich

E-Mail: []

Günther J. Weisbrich



Dallas, Texas, USA

Tel/VM: 214-691-0820

Fax: 214 -692-0530

E-Fax: 214 853 4268

Skype: gunther.weisbrich

E-Mail: []

See also

Congress:Top 100 Technologies Energy Hall of Fame Chicago



There was an error working with the wiki: Code[1] | News:Wind:2009 | News:Wind:2008


There was an error working with the wiki: Code[2]

Directory:Wind:Past Developments



There was an error working with the wiki: Code[3]

There was an error working with the wiki: Code[4]

Directory:High-Efficiency Horizontal Axis Wind Turbines

Directory:Home Generation:Wind Turbine

Directory:Vertical Axis Wind Turbines

Directory:High Altitude Wind Power


Directory:Wind Augmentation

Directory:Power Via Atmospheric Pressure Differences


Directory:Humdinger Windbelt



Directory:Wind Power in the United Kingdom

There was an error working with the wiki: Code[5]

- Directory







There was an error working with the wiki: Code[2]