Directory:Magnetic Power Inc

Lasted edited by Andrew Munsey, updated on June 14, 2016 at 9:01 pm.

  • 3 errors has been found on this page. Administrator will correct this soon.
  • This page has been imported from the old peswiki website. This message will be removed once updated.
Image:MPI test bench close-up 300.jpg

Magnetic Power Inc. Company assets are being acquired by Chava Energy. The new website is Devices formerly called Magnetic Power Modules(tm)are now called MagGen(tm).

Chava is developing these modules as well as other breakthrough technologies.

As of the Summer of 2009, Mark Goldes claims to have achieved several over-unity protypes, and hopes to have commercial 1 kW units ready next year. The company claims that those with an EE background and with an open mind will agree that the concept (disclosed under NDA) is workable.

For those who do not have access to proprietary photos, videos, and other evidence due to the proprietary nature of this technology, confidence is borrowed from CEO, Mark Goldes' reputation with Ultraconductors, a known and proven technology.

BEWARE OF PERPETUAL 'YEAR' : "In the six years I've been following Mark Goldes, he's posted around a dozen press releases, approximately two per year on average, and each typically states that his company is just one year away from producing a demonstration unit. Some of those statements can been seen below in the There was an error working with the wiki: Code[2] section. My associate who has known Goldes for 15 years, reports that Goldes has been saying that for fifteen years -- always 'one year' away. Golde's '1 year' is going for a record of the longest year ever." -- Congress:Founder:Sterling D. Allan, Dec. 20, 2008


"In the realm of ideas everything depends on enthusiasm... in the real world all rests on perseverance." -- Goethe

Entrepreneurs are by nature optimists. Those that ultimately succeed, find without exception that everything takes much longer than one had hoped, or anticipated. They also make numerous mistakes. Anyone who does anything useful that is difficult tends to find that goes with the territory. As President Kennedy once said about choosing to go to the moon: We do it “not because it is easy, but because it is hard.”

Our work has the potential to dramatically assist the utility and automotive industries. The technology we are developing can provide the potential to stimulate the world economy and kick-start renewed growth.

To learn more, see

Scientists and engineers are well equipped to evaluate our claims. Two large utilities are among major domestic companies that have signed NonDisclosure Agreements.

A few have attacked us on this website who do not believe ZPE or ambient heat can be converted into useful power. Such individuals can perhaps be called Perpetual Pessimists. Independent laboratory tests coupled with Demonstration Devices and toys are the cure for their condition. All three are prime objectives of our program.


Old Company Website

Executive Summary (doc)

Revolutionary Energy Breakthrough (doc)

Magnetic Power Modules™ Fast Track to Market (doc)

Automotive Propulsion Powered by Magnetic Power Modules (doc)

Magnetic Power Modules and Quantum Dynamos™ - sister company: Room Temperature Superconductors, Inc. "Has developed what are believed to be the world’s first, commercial, ambient-temperature superconducting polymer materials, trademarked."


Image:FreeEnergyNowRadioIcon95x95 byKevn.gif

Mark Goldes Featured on Free Energy Now Radio Show (download 19 Mb mp3) - On Aug. 5, 2006, Mark Goldes was the first guest hosted by Congress:Founder:Sterling D. Allan on his Free Energy Now radio series.


Photos of the actual devices under development are not being released except under NDA.

Test Bench
Image:MPI test bench 600.jpg

Automated Test Bench for developing Magnetic Energy Modules(tm)


There was an error working with the wiki: Code[1]

Patent Application US 2006/0163971 (PDF) Pending Solid State Electric Generator July 27, 2006.

Abstract: A solid-state electrical generator including at least one permanent magnet, magnetically coupled to a ferromagnetic core provided with at least one hole penetrating its volume the hole(s) and magnet(s) being placed such that the hole(s) penetrating the ferromagnetic core's volume intercept flux from the permanent magnet(s) coupled into the ferromagnetic core. A first wire coil is wound around the ferromagnetic core for the purpose of moving the coupled permanent magnet flux within the ferromagnetic core. A second wire is routed through the hole(s) penetrating the volume of the ferromagnetic core, for the purpose of intercepting this moving magnetic flux, thereby inducing an output electromotive force. A changing voltage applied to the first wire coil causes coupled permanent magnet flux to move within the core relative to the hole(s) penetrating the core volume, thus inducing electromotive force along wire(s) passing through the hole(s) in the ferromagnetic core. The mechanical action of an electrical generator is thereby synthesized without use of moving parts.

Magnetic Power Inc. Patent Application Published - Patent describes a Solid State Electric Generator, the first in a series of Magnetic Power Modules™ that the company says will produce electric power with no moving parts and no need for fuel. (PESN July 28, 2006)

MPI Press Release, July 27, 2006


Mark Goldes, Co-founder of Chava Energy and Chairman of Magnetic Power Inc. and its synergistic subsidiary company, Room Temperature Superconductors Inc. Chava is acquiring assets of both the earlier firms.


On May 14, 2009, Mark Goldes, provided the following self-evaluation of the MagGen technology according to the Congress:Technology Criteria set forth by the New Energy Congress. Numeric scoring will follow at a later date.

I. Renewable Yes

II. Environmental Impact Minimal

III. Cost (cents / kw-h) Estimated to be less than 1c/kwh for mass produced generators

IV. Credibility of Evidence Will be submitted for evaluation by EarthTech. The Florida lab has been visited by several scientists and engineers. Some were utility power people. All were positive in their evaluations. The Washington State lab has been visited by a NASA scientist working as a private consultant. It was also visited by experts in utility power. Again, the reactions were positive.

V. Stability / Reliability Expected to be high

VI. Implementation Manufacturing and licensees worldwide. The Company plans pilot plant production.

VII. Safety/Danger to Persons Not fully known as yet, but expected to prove far less dangerous than existing power sources

VIII. Politics of science The possibility of many human lives ending by about 2050, in the absence of revolutionary power sources, makes acceptance more likely as the facts and the danger become known. A political analog to a phase change is possible.

IX. Open-Source conducive Reproduction of the machine patented by Gary in 1874 is a good beginning for proving the science. Numerous expired patents since may reflect little noticed potential for working machines. Our own work is proprietary and will be produced by Chava as well as licensed to existing manufacturers.

X. Stage of Device Development Over Unity prototypes exist but are not quite ready for independent evaluation. However, that should take place relatively soon at EarthTech. Self-sustaining devices will follow. If major funding allows four teams of engineers and technicians to provide 24/7 project development, the speed of commercialization could prove surprisingly rapid.


On July 19, 2007, Goldes wrote:

All of my predictions [of company milestone achievements] are and were based on the assumption of adequate capital. In spite of written commitments by several parties, that [new capital] has not yet materialized. They never received the promised funds, which they anticipated - and therefore could not honor their written agreements. However, there is so much interest at this time, that very substantial funding does not seem far in the future.

Since 1984 when MPI began, we have raised in excess of $8 million in Angel funding. $5 million of that total was for the work with our Ultraconductors(tm). In addition, we have also completed four Small Business Innovation Research contracts with the government on these polymer equivalents of a room temperature superconductor.

When the crash occurred, Angel and VC funding suddenly stopped. High-tech firms, not yet producing revenue, were unable to obtain funding and many fine firms disappeared as a result. The miracle is that we are still here and growing.

Optimism is a fundamental requirement and always a potential failing of entrepreneurs. I certainly have been overly optimistic at times. However, had that not been the case, we would no longer be in business.

I have never been and am not now, interested in "quick money".

I began the search for alternatives to oil with the non-profit Aesop Institute in 1973. It has spawned MPI as well as the previous firm, SunWind Ltd., which created the Windmobile. That freeway capable, wind-electric powered vehicle was the cover story for Popular Science in November of 1976. SunWind ran dry in 1983. Only young people liked the idea of driving down the freeway in a vehicle that looked more like a jet airplane. Folks with funds wanted something that looked more conventional.

The following year, the late Dr. Robert Forward, then a physicist at Hughes Aircraft, published a paper in Physical Review B, a refereed physics journal, suggesting we could get electricity from Zero Point Energy. Shortly afterwards, an inventor contacted me, claiming he could build a magnetic device that would provide electricity without fuel or conventional input. MPI began by providing him with some modest support. He demonstrated an OU device to me some months later. Unfortunately, he was unable to reproduce it and it could not be patented or commercialized. His name was PowerPedia:Floyd "Sparky" Sweet. Although he has passed on, his invention continues to intrigue.

From 1984 until about four years ago, MPI evaluated dozens of claims of OU. We found most to be inventor's delusion. Few understand the complexities of accurate measurement. A handful were simply fraud. Our primary work centered on our Ultraconductors.

Then we met members of our present technical team. They were and remain among the finest engineers and technicians (also a former professor of physics) it has ever been my good fortune to meet.

I have been interested in keeping this work alive for many reasons, not the least of which is that a huge number of lives may depend on its success. I hope and continue to believe it will one day bring an excellent financial return to the lenders and investors who have been able and willing to keep this urgent program afloat.

Now it is time to accelerate the work.

I was once a Senior Director of the USAF/NATO radar station that controlled the Berlin Corridor. Radar stations operate 24/7. (Chava) can do the same. That will allow us to bring MagGen into the market as rapidly as is humanly possible.


Press Releases

April 30, 2008 - The first application will be to demonstrate that a plug-in hybrid car can be modified so that it no longer needs to plug-in. We expect to be able to demonstrate this within 12 months.

In the News
Image:Mylow magnet motor 090321 95x95.jpg

PowerPedia:Free energy > Perpetual Commotion - Directory:Magnetic Power Inc says that while free energy skeptics abound, devices like the fake MYLOW Magnetic Motor based on Howard Johnson's Design may it more difficult to open a door to wider appreciation of an extremely important potential for rapidly reducing our dependency on fossil fuels and reviving the automotive industry. (ZPEnergy March 21, 2009)

Image:Lee felsenstein 95x95.jpg

Revolutionary Energy Breakthroughs Can Kick-Start Economic Recovery! - MPI generators are tapping into Space Energy, referred to as the Quantum Vacuum, or Zero Point Energy (ZPE). Two major utilities and several very large firms have begun to evaluate MPI's magnetic energy conversion systems, some of which have no moving parts. (Video) (Renewable Energy World Oct. 8, 2008)

Image:MPI pattent application fig1 95x95.gif

Magnetic Power Inc. Patent Application Published - Patent describes a Solid State Electric Generator, the first in a series of Magnetic Power Modules™ that the company says will produce electric power with no moving parts and no need for fuel. (PESN July 28, 2006)

Magnetic Power Modules™ on fast path to market - Early production of demonstration devices anticipated for 2006. Prototypes said to demonstrate more output than input. Independent testing planned. (PESN July 9, 2006)

Magnetic Power Inc. Patent Application Publication Pending for Solid State Electric Generator - MPI aims to harness the organized motion of subatomic particles, which are responsible for the force of magnetism. (ZPEnergy June 30, 2006)

Image:MPI test bench device 95x95.jpg

Magnetic Power Inc. seeks bridge funding for revolutionary energy solutions - Energy technology said to harness 'virtual photon flux', a clean, inexhaustible supply that could resolve the world's energy needs. First public demonstration devices expected for sale later this year. (PESN June 7, 2006)

Image:Mark Goldes machine 95x95.jpg

Magnetic Power Modules™ and Quantum Dynamos™ - Magnetic Power Inc. CEO explains magnetic energy, conventional and groundbreaking, whereby the wheelwork of nature can be harnessed for practical energy applications. (PESN April 22, 2006)

Zero Point Energy: Can it become a practical, near-term, alternative? - by Mark Goldes (ZPEnergy April 12, 2004)

Group Claims to be on Verge of Abundant Energy Solution - Fuelless magnetic power and ambient temperature superconductors poised to revolutionize the generation and distribution of power. (PESN June 3, 2004)

Mark Goldes Interview with Tim Ventura - (ZPEnergy May 2004) audio


See: Talk:Directory:Magnetic Power Inc - extensive debate


Mark Goldes, Co-founder Chava Energy

email: []

phone: 707 829-9391 direct

cell: 707 280-8210

See Also

Directory:Mark Goldes

Directory:Zero Point Energy

Directory:Magnet Motors


- Directory







Category:Zero Point Energy

There was an error working with the wiki: Code[3]