Directory:Hans Coler Magnetic Power Apparatus

Lasted edited by Andrew Munsey, updated on June 14, 2016 at 8:52 pm.

  • This page has been imported from the old peswiki website. This message will be removed once updated.

Page first featured Nov. 2, 2008. Introduction revised and corrected Jan. 3, 2009 by MG

Image:HansColerMagnetromapparata300x300 byKevn.jpg
Image:Hcoler diagram 300.jpg


A solid-state magnetic generator was invented by Captain Hans Coler of Germany and a 10 watt example first shown in 1925. It involved magnets to generate electricity and employed a small battery but no other source of input power other than what he called space energy of Nature's quantum invisible world.

It was denied patent protection by the German Patent Office as being a perpetual motion device. For a time it was ignored, and the records relating to it were buried in hidden archives, possibly because the scientists who had to pass judgement could not understand the physical reason why the invention actually worked.

Later, a 70 Watt prototype was built, and a company formed: Coler Gmbh. Later a 5 kilowatt devices was built which allegedly powered Coler's house and laboratory for three years.

Official interest was shown by heads of the German navy who felt an investigation was necessary, and an official report was produced. A highly secret Nazi effort apparently had the goal of using his invention to recharge submarine batteries, without the need for the sub to surface. Experts examined the device and could find no fraud. It was judged Coler was an honest experimenter, but no expert opinion was forth coming as to how the unit operated. It was put under Official Secrecy after its operation had been verified by Government scientists. (Reference: articles entitled Perpetual Commotion and Hans Coler on )

We don't know of anyone who has been able to successfully replicate this technology into a practical device.

Official Website

None, as the inventor died long ago, and no one entity is continuing the company work as its legal successor, that we know of.

How it Works

Image:Colerdia 500.gif


Part 2

Part 3

Hans Coler (Same as above but all in one place.)

Harold Aspden, Lecture 7 The Coler Report - Why it Works - 1997.

The Magnetstromapparat

The Magnetstromapparat consisted of six permanent magnets wound so that the circuit includes the magnet itself as well as the windings. These six magnet-coils are arranged in a hexagon and connected in a circuit that includes two small condensers, a switch and a pair of solenoid coils, one sliding inside the other. To operate the device, the switch is left open, the magnets are moved slightly apart, and the sliding coils set into various positions. After the appropriate adjustments, at a critical separation of the magnets, an indicator appears on the voltmeter. The switch is then closed and the adjustments continue. Tension builds to a maximum and should then remain indefinitely. The greatest tension obtained was stated to be 12 volts.

The Stromerzeuger

The apparatus consists of three principle circuits which are inter-wound and intercoupled (verkoppelt) in a peculiar way. Some of these are divided again into single subsidiary circuits which evidently have all to be brought into resonance with one another.

The principle circuits (called the anchor) in which the energy gain probably occurs, consists of metal plates between which transformer coils are connected, the whole being connected to one large plate coil (Plattenspule).

On each of the single windings on this is coupled a large flat coil (Flachspule) (called field).

These flat coils are interwoven in two groups, these groups represent the turns of a transformer.

This couples, on one hand on the flat coils of the other group (as secondary coils), and on the other hand on the anchor-plate coil, which is placed between them.

The third electrically independent circuit (called the directing circuit) (Steuerkreis) regulates this transference.

This basic diagram shows the conditions necessary for self-interruption.

In consequence of this arrangement, different types of current are created in different conductors (pulsed direct current, alternating current, etc.)

The transformer coils, connected between the anchor plates, are connected in a peculiar way through thin permanent magnet rods. Their main object seems to be to pre-magnetize the transformer cores, it is, however, very probable that they are also connected with the Barckhausen effect, also shown by JLN Labs.

Image:Hcoler1 500.jpg

1. The basic principle is that an electron is to be regarded not only as a negatively charged particle but also as a South magnetic pole.

The basic element is that of an open secondary circuit, capacity loaded, inductively coupled to a primary circuit. The novel feature is that the capacities are connected to the secondary core through permanent magnets, as shown.

It is claimed that, on switching on the primary circuit, "separation of charges" takes place, i.e M1 becomes + vely charged and M2 - vely charged, and that these charges are "magnetically polorised" when they formed, owing to the presence of the magnets.

Image:Hcoler2 500.gif

On switching off the primary circuit a "reversing current" flows in the secondery, but the magnets "do not exert a polarising effect on this reversal"

2. Two of these basic elements are now placed together making a double system or stage with the plates close together in parallel planes as shown:

The secondary windings are both exactly equal and wound in a direction such that on switching on the primary coil the electrons in the secondary coil flow from P1 to P2 and F1 to F2.

It is then stated that system F1 - F2 merely has an inducing effect, and the useful current comes into existence in the system P1 -P2.

3. A single stage cannot be effective but two stages connected so that the numbers of effective North and South poles are equal will provide a basic working arrangement.

More double stages can then be added to provide higher outputs.

4. It is then stated that as well as the normal electrons flowing from the battery and induction when the circuit is opened or closed "space electrons" flow from "repelling spaces" to "attracting spaces" between the plates.

General principle of operation

The general principle of Coler free energy machine is

quite simple theoretically. It is simply a combination of coils

with the total effective negative magnetic permeability

due to the coils core material and the interaction

between them.

When the current changes inside the normal coil

with the inductance L it induces the voltage E equal E=- L dI/dt.

While it is shortcutted with the the resistor R

the current is the solution to the ordinary differential equation I R = -L dI /dt and for normal coils decays

down exponentially as I(t) = Io Exp(- R/L t)

but when L (L1+L2)/2 so the L is less than 0. For three solenoids the

inductance will be L=L1+L2+L3 - 2 M12 - 2 M13 - 2 M23 and so on. The more solenoids the easier it seems

to make the L negative by couplings only since the condition becomes weaker and weaker.

Some ferromagnets have the negative magnetic permeability when polariton resonance exists, so electromagnets with magnet cores and their combinations will extract the electromagnetic energy from the environment near this resonance to measurable currents and Coler machine works at

least from the principle with the technology mentioned.

The voltage in true Coler machine therefore originates

from accumulation of all the electromagnetic energy

around of all radio frequencies due to the

negative inductance of the integrating antenna.

The original wrong theoretical assumption of Coler that the electrons are magnetic monopoles is not any

problem here since the direct coupling of additional magnetization due to the voltage on the magnetic core

exists due to two known effects, simply the electrostriction and than piezomagnetism (note the direct

conduction through magnets inside coils). The voltages on the

coil will change the shape of the magnetic core while this change will induce extra magnetic fields being

equivalent to accumulation of the monopole magnetic charges which can further overinduce currents without the work back

contributing to negative inductance. As a matter of fact the assumption

of electromagnetism with magnetic charges is not changing any principle of operation as the only difference is that electrons would change magnetization by injection but not the spin polarization due to electrostriction-piezomagnetism.

For the true machine the correction therefore exists from the gravity waves which deform the coils and from the piezoelectricity and piezomagnetism so the original patent should not be rejected since the machine operates according to real science at infinitesimal powers.

The simulatory powered version of the device which can "produce" arbitrary power can be easy build with

the system of intelligent coils with electronic amplifiers, having extra powered coils

hidden inside the coupled coils of the hexagon which will be equivalent to hypothetical injection

of south poles electron to overinduce currents in neighboring coils without the destructive feedback work

on the original current coil. And even simple version with amplifier can be build simulating oversuperconducting coil with the transformer with powered outer wire such that the

induced current is reverced by amplification of negligible part

of the first coil current and therefore helps the original in the first wire with induction current

in the same direction. This leads

to the exponential growth of the current in the first coil, and without the fuse theoretically

to infinity. Note that as a matter of fact in the presence of some external electromagnetic energy

even a single coil can be seen as having the effective negative inductance. Let E=-L dI/dt + d \Phi/dt, where \Phi

is an external magnetic flux. It is enough to assume d \Phi/dt=L1 dI/dt, than

E=-(L-L1) dI/dt and for sufficiently large external flux change L-L1